Latest revision as of 20:27, 7 September 2012

Texas Instruments TWL5030 Power Management (Catalog name TPS65950)

Motorola uses CPCAP caption for that chip.

Description

The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high-speed (HS) transceiver, an ac/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.

The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex™ class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module.

Features

• Power:

1. Two efficient stepdown converters for processor cores
2. One efficient stepdown converter for input/output (I/O) power
3. SmartReflexTM-compliant dynamic voltage management for the processor core
4. Three low-dropout regulators (LDOs) for phase-locked loops (PLLs) and digital-to-analog converter (DAC)
5. Seven miscellaneous linear regulator supplies for peripherals

• Audio:

1. Voice codec
2. 15-bit linear codec (8 kHz/16 kHz)
3. Differential input main microphone and submicrophone (for noise cancellation)
4. Single-ended hands-free input
5. Differential 32-Ω speaker and 16-Ω headset drivers
6. 8-Ω stereo class-D drivers
7. Pulse-code modulation (PCM)/(inter-IC sound [I2STM]/time-division multiplexing [TDM]) interfaces
8. Bluetooth® voice interface
9. Automatic level control (ALC) function
10. Ability to mix paths in digital and analog domains
11. 16-bit linear audio stereo DAC (96 kHz, 48 kHz, 44.1 kHz, 32 kHz, and derivatives)
12. 16-bit linear audio stereo analog-to-digital (ADC) (48 kHz, 44.1 kHz, 32 kHz, and derivatives)
13. PLL for audio codec with 256*Fs or 128*Fs generation
14. Carkit (CEA-936A)

• Charger:

1. Li-ion, Li-polymer, and manganese-cobalt charger
2. AC regulated charger (maximum 7 V)
3. Universal serial bus (USB) charger (CEA-936A)
4. Backup battery charger

• USB:

1. USB 2.0 OTG-compliant high-speed (HS) transceivers
2. 12-bit USB transceiver macrocell interface (UTMI)+ low pin interface (ULPI)
3. USB power supplies (5 V, 3 V)
4. Carkit-compliant CEA936 and multiple channels per carrier (MCPC)

• Plus:

1. LED driver
2. Two pulse width modulation (PWM) generators, PWM0 and PWM1
3. Embedded 10-bit ADC with 3 to 8 external inputs
4. Real-time clock (RTC) module and retention modules
5. uC with vendor specific sized fast turn ROM to provide for programmable regulator defaults and start-up timing
6. 4k bytes of RAM (< 1uA leakage) for uC application code
7. HS inter-integrated circuit I2CTM serial control
8. Thermal shutdown protection and hot-die detection
9. Keypad up to 8 x 8 matrix
10. 0.4 mm pitch, 7 x 7 mm package

• Applications:

1. Cellular/smart phone

Datasheet: File:Tps65950 data.pdf File:Tps65930 data.pdf

TRM: File:Tps65950 TRM.pdf File:Tps65930 TRM.pdf

Errata: File:Tps65930-errata.pdf

Audio: File:Tps65950-audio.pdf File:Tps65930-audio.pdf

User Guide: File:Tps65950-user guide.pdf File:Tps65930-user guide.pdf

Schematics checklist: File:Tps65950-schematics.pdf File:Tps65930-schematics.pdf

PCB Layout guide: File:Tps65950-layout.pdf File:Tps65930-layout.pdf

Backup state configure: File:Tps65930-configure.pdf

Real Time Clock: File:Tps65950-rtc.pdf

Simulation: File:Tps65950 ibs model-a.zip