Motorola DEXT kernel output

From MILEDROPEDIA
Jump to: navigation, search

This is the output of the CyanogenMod kernel running on the Motorola DEXT.

<5>[    0.000000] Linux version 2.6.29.6JassyCliq (jassycliq@jassycliq-crappy-core) (gcc version 4.2.1) #39 PREEMPT Sun May 22 12:06:02 PDT 2011
<4>[    0.000000] CPU: ARMv6-compatible processor [4117b362] revision 2 (ARMv6TEJ), cr=00c5387f
<4>[    0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Morrison
<6>[    0.000000] mot_fixup: smi_64m=1, ddr_mono=1
<6>[    0.000000] mot_fixup: mot_hw_rev=a00
<6>[    0.000000] mot_fixup: cmdline="no_console_suspend=1 console=null quiet androidboot.serialno=XXX"
<4>[    0.000000] mot_fixup: bank[0]=10000000@10000000
<4>[    0.000000] mot_fixup: bank[1]=8000000@20000000
<4>[    0.000000] mot_fixup: ramconsole_resource[0]=2c96000..2cb6000
<4>[    0.000000] mot_fixup: msm_fb_resources[0]=2c00000..2c96000
<4>[    0.000000] mot_fixup: android_pmem_pdata.start=0
<4>[    0.000000] mot_fixup: android_pmem_adsp_pdata.start=2000000
<4>[    0.000000] mot_fixup: resources_hw3d[2].start=0
<4>[    0.000000] Ignoring unrecognised tag 0x00000000
<6>[    0.000000] Partition (from atag) boot -- Offset:168 Size:18
<6>[    0.000000] Partition (from atag) system -- Offset:180 Size:456
<6>[    0.000000] Partition (from atag) userdata -- Offset:5d6 Size:6fc
<6>[    0.000000] Partition (from atag) misc -- Offset:cd2 Size:2
<6>[    0.000000] Partition (from atag) recovery -- Offset:cd4 Size:28
<6>[    0.000000] Partition (from atag) cache -- Offset:cfc Size:300
<6>[    0.000000] Partition (from atag) splash -- Offset:ffc Size:4
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[    0.000000] On node 0 totalpages: 65536
<7>[    0.000000] free_area_init_node: node 0, pgdat c05dbba8, node_mem_map c0759000
<7>[    0.000000]   Normal zone: 512 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
<6>[    0.000000] Allocating 8388608 bytes at c103b000 (1103b000 physical) for pmem
<6>[    0.000000] Allocating 8388608 bytes at c1900000 (11900000 physical) for gpu1 pmem
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
<5>[    0.000000] Kernel command line: no_console_suspend=1 console=null quiet androidboot.serialno=XXX
<3>[    0.000000] Unknown boot option `androidboot.serialno=XXX': ignoring
<4>[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
<4>[    0.000000] Console: colour dummy device 80x30
<6>[    0.000363] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.001811] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    0.023085] Memory: 256MB = 256MB total
<5>[    0.023130] Memory: 235520KB available (5568K code, 1760K data, 152K init)
<6>[    0.023673] Calibrating delay loop... 527.56 BogoMIPS (lpj=2637824)
<4>[    0.270476] Mount-cache hash table entries: 512
<6>[    0.271443] CPU: Testing write buffer coherency: ok
<6>[    0.276076] net_namespace: 984 bytes
<6>[    0.277506] NET: Registered protocol family 16
<6>[    0.278705] socinfo_init: v2, id=16, ver=2.0, raw_id=368, raw_ver=3
<6>[    0.278743] acpu_clock_init()
<6>[    0.278916] L val: PLL0: 12, PLL1: 50, PLL2: 55
<6>[    0.278946] Turbo mode supported and enabled.
<6>[    0.279015] ACPU running at 528000 KHz
<6>[    0.279043] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
<6>[    0.279076]  0   19200  -1   1   19200    1   30720 -1 -1 -1  4  1  3
<6>[    0.279105]  1  120000   1   8   50000    2   61440 -1 -1 -1  4  5  6
<6>[    0.279135]  2  122880   0   2   50040    2   61440 -1  1 -1  4  5  6
<6>[    0.279165]  3  176000   2   6   60000    2   61440  2  1 -1  4  5  6
<6>[    0.279193]  4  245760   0   1   60020    3   61440  2  1  3 -1  7  6
<6>[    0.279223]  5  320000   1   3   80000    3  120000  2  1  3 -1  7  9
<6>[    0.279253]  6  352000   2   3   88000    4  120000  2  1  3 -1  7 10
<6>[    0.279283]  7  480000   1   2  120000    4  120000  4  5  6 -1 -1 17
<6>[    0.279313]  8  528000   2   2  132000    4  160000 -1  5  6 -1 -1 19
<6>[    0.279343]  9  576000   2   2  132000    4  160000 -1  5  6 -1 -1 19
<6>[    0.279373] 10  595200   2   2  132000    4  160000 -1  7  6 -1 -1 19
<6>[    0.279403] 11  614400   2   2  132000    4  160000 -1  7  8 -1 -1 19
<6>[    0.279433] 12  633600   2   2  132000    4  160000 -1  7  8 -1 -1 19
<6>[    0.279463] 13  652800   2   2  132000    4  160000 -1  7  8 -1 -1 19
<6>[    0.279493] 14  672000   2   2  132000    4  160000 -1  7  8 -1 -1 19
<6>[    0.279523] 15  691200   2   2  132000    4  160000 -1  7  8 -1 -1 19
<6>[    0.279553] 16  710400   2   2  132000    4  160000 -1  7  8 -1 -1 19
<6>[    0.279583] 17  729600   2   2  132000    4  160000 -1  7  8 -1 -1 19
<6>[    0.279613] 18  748800   2   2  132000    4  160000 -1 -1  8 -1 -1 19
<6>[    0.279645] 19  768000   2   1  192000    4  160000 -1 -1  8 -1 -1 -1
<6>[    0.279668] 16 scaling frequencies supported.
<6>[    0.279715] morrison_setup, hw_rev: a00 ...
<4>[    0.296045] bio: create slab <bio-0> at 0
<6>[    0.297728] usbcore: registered new interface driver usbfs
<6>[    0.297955] usbcore: registered new interface driver hub
<6>[    0.298388] usbcore: registered new device driver usb
<6>[    0.298875] msm_i2c_probe
<6>[    0.299051] msm_i2c_probe: clk_ctl 35a, 100000 Hz
<6>[    0.301130] accel_probe: I2C device with address 0x18 is LIS331DLH accelerometer
<6>[    0.301168] accel_probe: swapped axes parameter 0x00
<6>[    0.301191] accel_probe: platform data for 'stmicro', num_resources 1
<6>[    0.301236] accel_irq_config_edge: GPIO 18 configured as an interrupt line, irq 82, current value 0
<6>[    0.301416] accel_irq_config_edge: irq = 82
<6>[    0.301876] input: accelerometer as /devices/virtual/input/input0
<6>[    0.301916] accel_probe: registered input device accelerometer
<6>[    0.301928] 
<6>[    0.301955] accel_i2c_set_config: mode=0 (power off), odr=0 (10Hz), fs=0, interval=100
<6>[    0.301970] 
<6>[    0.304701] accel_probe: registered misc device
<6>[    0.304718] 
<6>[    0.304853] accel_probe: created sysfs group
<6>[    0.304865] 
<6>[    0.304883] accel_probe: driver probed successfully
<6>[    0.306846] Bluetooth: Core ver 2.15
<6>[    0.307546] NET: Registered protocol family 31
<6>[    0.307576] Bluetooth: HCI device and connection manager initialized
<6>[    0.307606] Bluetooth: HCI socket layer initialized
<6>[    0.308130] cfg80211: Using static regulatory domain info
<6>[    0.308161] cfg80211: Regulatory domain: US
<6>[    0.308181] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[    0.308208] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
<6>[    0.308235] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>[    0.308258] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>[    0.308283] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>[    0.308306] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>[    0.308331] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
<6>[    0.308356] cfg80211: Calling CRDA for country: US
<6>[    0.308970] accel_irq_bottom_half_job: status 0x00, src_1 0x00, src_2 0x00  force 0
<7>[    0.310323] Switched to high resolution mode on CPU 0
<6>[    0.311681] NET: Registered protocol family 2
<6>[    0.312053] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.312916] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.313593] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.313933] TCP: Hash tables configured (established 8192 bind 8192)
<6>[    0.313956] TCP reno registered
<6>[    0.314388] NET: Registered protocol family 1
<6>[    0.315018] checking if image is initramfs... it is
<6>[    0.385846] Freeing initrd memory: 232K
<3>[    0.389256] prevening battery charge since battery temp cannot be obtained
<6>[    0.390050] HEADSET: Registering headset driver
<6>[    0.391370] input: headset as /devices/virtual/input/input1
<6>[    0.391855] smd probe
<6>[    0.391881] smd_core_init()
<6>[    0.392021] smd_core_init() done
<3>[    0.392435] _smem_log_init: no power log or log_idx allocated, smem_log disabled
<6>[    0.393425] smd_alloc_channel() 'DS' cid=0
<6>[    0.393711] smd_alloc_channel() 'DIAG' cid=1
<6>[    0.393901] smd_alloc_channel() 'RPCCALL' cid=2
<6>[    0.394066] smd_alloc_channel() 'DATA1' cid=7
<6>[    0.394251] smd_alloc_channel() 'DATA2' cid=8
<6>[    0.394426] smd_alloc_channel() 'DATA3' cid=9
<6>[    0.394585] smd_alloc_channel() 'DATA4' cid=10
<6>[    0.394778] smd_alloc_channel() 'DATA5' cid=11
<6>[    0.394935] smd_alloc_channel() 'DATA6' cid=12
<6>[    0.395090] smd_alloc_channel() 'DATA7' cid=13
<6>[    0.395271] smd_alloc_channel() 'DATA11' cid=17
<6>[    0.395445] smd_alloc_channel() 'DATA5_CNTL' cid=38
<6>[    0.395608] smd_alloc_channel() 'DATA6_CNTL' cid=39
<6>[    0.395781] smd_alloc_channel() 'DATA7_CNTL' cid=40
<6>[    0.399225] SMD Control Port Driver Initialized.
<6>[    0.400576] SMD: ch 2 CLOSED -> OPENING
<6>[    0.400705] SMD: ch 2 OPENING -> OPENED
<3>[    0.401308] Using very old AMSS modem firmware.
<6>[    0.401521] [adsp:adsp.c:adsp_init] rs3000000a:00010000 -- 0
<3>[    0.423618] rpcrouter: Server create rejected, version = 0, program = 30000012
<3>[    0.423671] rpcrouter: Server create rejected, version = 0, program = 3000fe00
<3>[    0.425833] rpcrouter: Server create rejected, version = 0, program = 30000066
<6>[    0.438165] ashmem: initialized
<4>[    0.441723] yaffs May 22 2011 11:25:30 Installing. 
<6>[    0.441838] msgmni has been set to 460
<6>[    0.446530] alg: No test for stdrng (krng)
<6>[    0.446705] io scheduler noop registered
<6>[    0.446733] io scheduler anticipatory registered (default)
<6>[    0.446755] io scheduler deadline registered
<6>[    0.446991] io scheduler cfq registered
<6>[    0.447191] io scheduler bfq registered
<6>[    0.447941] msm_fb_probe:  phy_Addr = 0x2c00000 virt = 0xd0900000
<6>[    0.449441] MDP HW Base phy_Address = 0xaa200000 virt = 0xd0c00000
<6>[    0.450123] primary mddi base phy_addr = 0xaa600000 virt = 0xd081e000
<4>[    0.471301] mddi_tpo_nv_init: client_id=0x0, crc=0x5D13, width=320, height=480
<4>[    0.590603] mddi_tpo_nv_seq_init: Found TPO vG Display
<4>[    0.908958] Console: switching to colour frame buffer device 40x30
<6>[    1.226271] FrameBuffer[0] 320x480 size=614400 bytes is registered successfully!
<6>[    1.226298] CONFIG_FB_MSM_LOGO is enabled
<4>[    1.226398] load_565rle_image: Can not open /logo.rle
<6>[    1.226419] Called load_565rle_image -2
<6>[    1.226911] lmxxxx_set_pwm: setting PWM to 0
<4>[    1.227848] tvenc: probe of tvenc.327680 failed with error -1
<3>[    1.246203] dcc_tty_probe: probing to DCC failed
<6>[    1.246383] msm_serial: detected port #2
<6>[    1.246561] msm_serial.2: ttyMSM2 at MMIO 0xa9c00000 (irq = 11) is a MSM
<6>[    1.247383] msm_serial: driver initialized
<6>[    1.247836] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[    1.248544] msm_serial_hs module loaded
<6>[    1.253014] brd: module loaded
<6>[    1.257136] loop: module loaded
<6>[    1.257268] pmem: 1 init
<6>[    1.258218] pmem_adsp: 0 init
<6>[    1.259229] Android kernel panic handler initialized (bind=kpanic)
<6>[    1.259464] fun camera_misc_init camera misc init
<6>[    1.259478] 
<6>[    1.259834] PPP generic driver version 2.4.2
<6>[    1.260206] NET: Registered protocol family 24
<6>[    1.260424] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[    1.260453] CSLIP: code copyright 1989 Regents of the University of California.
<6>[    1.261764] rmnet0 (): not using net_device_ops yet
<6>[    1.262583] rmnet1 (): not using net_device_ops yet
<6>[    1.263401] rmnet2 (): not using net_device_ops yet
<6>[    1.264153] Linux video capture interface: v2.00
<6>[    3.024293] msm_v4l2: msm_v4l2_init
<6>[    3.025423] msm_nand: phys addr 0xa0a00000 dmac 0x7
<6>[    3.025496] allocated dma buffer at ffa2e000, dma_addr 1fbad000
<6>[    3.025986] ONFI probe : CRC Check failed on ONFI Parameter data 
<6>[    3.026129] status: e00020
<6>[    3.026149] nandid: 5510bcad maker ad device bc
<6>[    3.026171] Found a supported NAND device
<6>[    3.026186] NAND Id  : 0x5510bcad
<6>[    3.026201] Buswidth : 16 Bits 
<6>[    3.026214] Density  : 512 MByte
<6>[    3.026226] Pagesize : 2048 Bytes
<6>[    3.026243] Erasesize: 131072 Bytes
<6>[    3.026256] Oobsize  : 64 Bytes
<6>[    3.026271] CFG0 Init  : 0xe85408c0 
<6>[    3.026284] CFG1 Init  : 0x0004745e 
<6>[    3.026299] ECCBUFCFG  : 0x00000203 
<5>[    3.026329] Creating 7 MTD partitions on "msm_nand":
<5>[    3.026358] 0x000002d00000-0x000003000000 : "boot"
<5>[    3.027829] 0x000003000000-0x00000bac0000 : "system"
<5>[    3.028798] 0x00000bac0000-0x000019a40000 : "userdata"
<5>[    3.029733] 0x000019a40000-0x000019a80000 : "misc"
<5>[    3.030851] 0x000019a80000-0x000019f80000 : "recovery"
<5>[    3.031876] 0x000019f80000-0x00001ff80000 : "cache"
<5>[    3.032831] 0x00001ff80000-0x000020000000 : "splash"
<6>[    3.034893] usbcore: registered new interface driver cdc_acm
<6>[    3.034936] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    3.035298] msm_hsusb_rpc_connect: rpc connect success vers = 10001
<6>[    3.035336] msm_chg_rpc_connect: connected to rpc vers = 10001
<6>[    3.035476] usb_set_composition: composition set to product id = 2d67
<6>[    3.035501] phy info:(2)
<6>[    3.035653] usb_probe() io=d082c000, irq=47, dma=ffa2f000(1fbbc000)
<6>[    3.044041] msm_hsusb_reset_rework_installed: rework: (16777216)
<6>[    3.044073] usb_probe: reset rework is installed
<6>[    3.045044] Created the sysfs entry successfully 
<6>[    3.046746] usb_function_register: name = 'adb',  map = 1
<6>[    3.047074] usb_function_register: name = 'usb_mass_storage',  map = 4
<6>[    3.047106] usb_set_composition: composition set to product id = 2d67
<3>[    3.047768] msm_hsusb_is_serial_num_null: rpc call success
<3>[    3.048486] msm_hsusb_send_serial_number: rpc call failed! error: -22
<3>[    3.049416] msm_hsusb_send_productID: rpc call success
<6>[    3.049448] msm_hsusb: functions bound. starting.
<6>[    3.049469] usb_bind_func() (usb_mass_storage)
<3>[    3.049961] usb_start: pm_app_rpc connect failed
<6>[    3.050859] usb_function_register: name = 'diag',  map = 0
<6>[    3.051618] usb_function_register: name = 'modem',  map = 3
<6>[    3.051688] usb_ether_setup()
<6>[    3.051796] usb0 (): not using net_device_ops yet
<6>[    3.052674] usb_function_register: name = 'ethernet',  map = 2
<6>[    3.055039] sfh7743_probe: Enter....
<6>[    3.055468] input: proximity as /devices/virtual/input/input2
<6>[    3.056211] sfh7743_probe: initialized gpio_int[29]irq[93] gpio_en[16]
<7>[    3.056684] RTC Registering with rs30000048:00020000
<7>[    3.057873] msm_rtc: dev (254:0)
<6>[    3.057964] rs30000048:00020000 rs30000048:00020000: rtc core: registered msm_rtc as rtc0
<7>[    3.058329] msm_rtc_secure: dev (254:1)
<6>[    3.058351] rs30000048:00020000 rs30000048:00020000: rtc core: registered msm_rtc_secure as rtc1
<6>[    3.058489] i2c /dev entries driver
<3>[    3.059108] i2c_bit_add_numbered_bus
<6>[    3.059561] i2c-gpio i2c-gpio.1: using pins 61 (SDA) and 60 (SCL, no clock stretching)
<6>[    3.059904] sfh7743: presence [1e]
<6>[    3.060131] msm_hsusb_phy_reset
<4>[    3.330543] ADP5588 Keypad Dev ID : 0x2,Body ID 0  Name : adp5588_morrison , RST 1
<6>[    3.331128] input: adp5588_morrison as /devices/virtual/input/input3
<6>[    3.331711] ADP5588 : Start keypad adp5588_morrison in interrupt mode irq 85 
<6>[    3.351603] input: compass as /devices/virtual/input/input4
<6>[    3.354236] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
<6>[    3.354413] Bluetooth: HCI UART driver ver 2.2
<6>[    3.354441] Bluetooth: HCI H4 protocol initialized
<6>[    3.354461] Bluetooth: HCI BCSP protocol initialized
<6>[    3.354481] Bluetooth: MSM Sleep Mode Driver Ver 1.1
<6>[    3.354964] BLUETOOTH: /proc/bt_power created
<6>[    3.355003] BLUETOOTH: /proc/bt_stat created
<6>[    3.355031] BLUETOOTH: /proc/bt_status created
<6>[    3.355058] BLUETOOTH: /proc/bt_irq created
<6>[    3.355081] BLUETOOTH: bt_power: Bluetooth power is off, and BT module is in reset.
<7>[    3.357618] msmsdcc_platform_status_irq: 81
<6>[    3.357658] mmc0: Slot status change detected (0 -> 1)
<6>[    3.358283] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,81 dma 8
<6>[    3.358318] mmc0: 4 bit data mode enabled
<6>[    3.358334] mmc0: polling status mode disabled
<6>[    3.358354] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[    3.358374] mmc0: Slot eject status = 0
<6>[    3.358391] mmc0: Power save feature enable = 1
<6>[    3.358413] mmc0: DM non-cached buffer at ffa31000, dma_addr 0x1fbea000
<6>[    3.358436] mmc0: DM cmd busaddr 0x1fbea000, cmdptr busaddr 0x1fbea300
<6>[    3.358924] mot_sdcc_wifi_status_notify_register:  status_notify callback registered dev_ptr cfbcb9e0
<6>[    3.359448] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8
<6>[    3.359476] mmc1: 4 bit data mode enabled
<6>[    3.359491] mmc1: polling status mode disabled
<6>[    3.359511] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[    3.359531] mmc1: Slot eject status = 1
<6>[    3.359548] mmc1: Power save feature enable = 1
<6>[    3.359568] mmc1: DM non-cached buffer at ffa32000, dma_addr 0x1fbeb000
<6>[    3.359593] mmc1: DM cmd busaddr 0x1fbeb000, cmdptr busaddr 0x1fbeb300
<6>[    3.359886] lm3535_init: enter
<6>[    3.360001] lm3535_probe: interim display
<6>[    3.360026] lm3535_probe: enter (morrison), I2C address = 0x38, flags = 0x0
<6>[    3.360054] lm3535_probe: morrison Pa00, resistor = 0x30, zones: 0x2 0xbd 0xfe 0xff
<6>[    3.380593] lm3535_setup: revision 5 (0x1)
<4>[    3.508844] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[    3.508903] mmc0: new SD card at address a95c
<6>[    3.509753] mmcblk0: mmc0:a95c SR256 241 MiB 
<6>[    3.510364]  mmcblk0: p1
<3>[    3.513328] msm_sdcc_setup_power - ENABLING...WIFI
<6>[    3.711509] usb_lpm_enter: usb in low power mode
<6>[    3.711546] hsusb: IDLE -> OFFLINE
<6>[    3.760514] lm3535_configure: ALS Register: 0xf8, zone 0
<6>[    3.761594] Registered led device: lcd-backlight
<6>[    3.761788] Registered led device: lcd-nr-backlight
<6>[    3.762609] input: als as /devices/virtual/input/input5
<6>[    3.763444] adp8862_init: enter
<3>[    3.763613] pm7540_btn_leds_init: enter
<3>[    3.764248] pm7540_btn_leds_probe: enter
<6>[    3.764491] Registered led device: button-backlight
<6>[    3.764663] Registered led device: button-tcmd
<3>[    3.764689] lm3535_als_is_dark: enter, zone = 0
<6>[    3.764708] pm7540_btn_leds_probe: ALS zone is 0
<6>[    3.764733] pm7540_btn_leds_probe: registered ALS callback 0xc02e46d8
<3>[    3.764766] pm7540_soc_leds_init: enter
<3>[    3.765319] pm7540_soc_leds_probe: enter
<3>[    3.765341] pm7540_soc_leds_probe:morrison; returning
<4>[    3.765391] pm7540-soc-leds: probe of pm7540-soc-leds.0 failed with error -22
<3>[    3.765649] pm7540_kpd_leds_init: platform_driver_register returned 0
<3>[    3.765958] pm7540_kpd_leds_probe: morrison; returning.
<4>[    3.766003] pm7540-kpd-leds: probe of pm7540-kpd-leds.0 failed with error -22
<3>[    3.766034] pm7540_kpd_leds_init: platform_device_register returned 0
<3>[    3.766058] keypad_leds_init: enter
<6>[    3.766753] Registered led device: keyboard-backlight
<6>[    3.766958] Registered led device: keyboard1-backlight
<6>[    3.767139] Registered led device: keyboard2-backlight
<6>[    3.767298] Registered led device: keyboard-tcmd
<6>[    3.767469] Registered led device: keyboard1-tcmd
<6>[    3.767624] Registered led device: keyboard2-tcmd
<3>[    3.767651] lm3535_als_is_dark: enter, zone = 0
<6>[    3.767669] keypad_leds_probe: ALS zone = 0
<3>[    3.767701] fan5646_init: enter
<3>[    3.767966] fan5646_init: platform_driver_register returned 0
<6>[    3.768291] fan5646_probe: enter
<6>[    3.768488] Registered led device: messaging
<3>[    3.768548] fan5646_init: platform_device_register returned 0
<6>[    3.770124] logger: created 256K log 'log_main'
<6>[    3.770623] logger: created 256K log 'log_events'
<6>[    3.770934] logger: created 64K log 'log_radio'
<6>[    3.771219] logger: created 64K log 'log_system'
<6>[    3.771543] logger: created 64K log 'log_kernel'
<6>[    3.771573] console [logger-1] enabled
<6>[    3.771733] ram_console: got buffer at 2c96000, size 20000
<6>[    3.771839] ram_console: found existing buffer, size 23678, start 23678
<6>[    3.772984] console [ram-1] enabled
<6>[    3.774289] ramzswap: num_devices not specified. Using default: 1
<0>[    3.775063] Motorola software version: R6380E210_001.016<6>Advanced Linux Sound Architecture Driver Version 1.0.18a.
<4>[    3.776163] No device for DAI CODEC_DAI
<4>[    3.776206] No device for DAI CPU_DAI
<3>[    3.776613] msm_soc: create pcms
<6>[    3.777073] asoc: CODEC_DAI <-> CPU_DAI mapping ok
<3>[    3.777113] msm_soc: ALSA MSM Mixer Setting
<6>[    3.778456] ALSA device list:
<6>[    3.778503]   #0: msm-audio (MSM-CARD)
<4>[    3.778706] Netfilter messages via NETLINK v0.30.
<4>[    3.778903] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
<4>[    3.779476] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[    3.779521] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
<4>[    3.779554] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<4>[    3.779751] ctnetlink v0.93: registering with nfnetlink.
<6>[    3.780171] xt_time: kernel timezone is -0000
<6>[    3.780423] IPv4 over IPv4 tunneling driver
<6>[    3.781924] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.782361] arp_tables: (C) 2002 David S. Miller
<6>[    3.782479] TCP cubic registered
<6>[    3.783164] NET: Registered protocol family 10
<6>[    3.786234] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.786411] IPv6 over IPv4 tunneling driver
<6>[    3.787791] NET: Registered protocol family 17
<6>[    3.787936] Bluetooth: L2CAP ver 2.13
<6>[    3.787968] Bluetooth: L2CAP socket layer initialized
<6>[    3.788013] Bluetooth: SCO (Voice Link) ver 0.6
<6>[    3.788036] Bluetooth: SCO socket layer initialized
<3>[    3.791503] msm_sdcc_setup_power - DISABLING...WIFI
<6>[    3.791968] Bluetooth: RFCOMM socket layer initialized
<6>[    3.792088] Bluetooth: RFCOMM TTY layer initialized
<6>[    3.792123] Bluetooth: RFCOMM ver 1.11
<6>[    3.792153] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    3.792179] Bluetooth: BNEP filters: protocol multicast
<6>[    3.792206] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    3.793471] RPC: Registered udp transport module.
<6>[    3.793524] RPC: Registered tcp transport module.
<6>[    3.793558] lib80211: common routines for IEEE802.11 drivers
<7>[    3.793588] lib80211_crypt: registered algorithm 'NULL'
<6>[    3.794179] clock_late_init() disabled 17 unused clocks
<6>[    3.794778] adp5588: using input dev headset for key reset
<6>[    3.794833] adp5588: using input dev adp5588_morrison for key reset
<6>[    3.795586] GPIO Input Driver: Start gpio inputs for morrison-kpd in interrupt mode
<6>[    3.795863] GPIO Input Driver: Start gpio inputs for morrison-kpd in interrupt mode
<6>[    3.796424] input: morrison-kpd as /devices/virtual/input/input6
<6>[    3.796904] adp5588: using input dev morrison-kpd for key reset
<3>[    3.797946] Using very old AMSS modem firmware.
<6>[    3.798213] VFP support v0.3: not present
<4>[    3.800218] key08_ts_probe: Enter
<4>[    3.800751] key08_ts_init: misc_register(pf) returns 0
<4>[    3.800806] key08_ts_probe: paltform data for 'key08', num_resources 1
<4>[    3.800839] key08_ts_probe: Got resource. Normal Addr: 0x11, Bootloader: 0x5f
<4>[    3.800868] key08_ts_probe: attached, client: 0xcf9c7000
<4>[    3.800891] key08_ts_probe: irq: 0x69
<3>[    3.800911] key08_ts_probe STARTED
<3>[    3.800929] key08_ts_probe Getting Versions
<6>[    3.801154] RPC_TIME_TOD_SET_APPS_BASES:
<6>[    3.801168] 	tick = 200010
<6>[    3.801174] 	stamp = 1026516069
<6>[    3.802461] rs30000048:00020000 rs30000048:00020000: setting system clock to 2011-08-09 10:36:14 UTC (1312886174)
<4>[    3.822164] key08_ts_probe: (1) receiving from 0x11(number of bytes: 6, type: 7): 0x70, 0x90, 0x30, 0x36, 0xe, 0xe
<4>[    3.841154] key08_ts_probe: (2) receiving from 0x11(number of bytes: 6, type: 7): 0x70, 0x50, 0x30, 0x36, 0xe, 0xe
<4>[    3.861101] key08_ts_probe: (3) receiving from 0x11(number of bytes: 6, type: 7): 0x70, 0x10, 0x30, 0x36, 0xe, 0xe
<4>[    3.881156] key08_ts_probe: (4) receiving from 0x11(number of bytes: 6, type: 7): 0x70, 0x0, 0x30, 0x36, 0xe, 0xe
<4>[    3.901169] key08_ts_probe: Got all data.
<4>[    3.921123] key08_ts_probe: Chip ID 0x30
<4>[    3.941173] key08_ts_probe: Product Code Version 0x36
<4>[    3.941226] key08_ts_probe Initializing Panel 
<3>[    3.941314] key08_ts_probe: max_x 1023, max_y 1023
<3>[    3.941354] key08_ts_probe: inactive_x 0 0, inactive_y 0 0
<6>[    3.942549] input: touchscreen as /devices/virtual/input/input7
<6>[    3.943076] adp5588: using input dev touchscreen for key reset
<4>[    3.943128] key08_ts_probe Gpio request
<4>[    3.943174] key08_ts_probe: ret from gpio_direction_input = 0
<3>[    3.943209] key08_ts_probe: gpio_request KEY08_TS_GPIO =  1
<6>[    3.943396] key08_ts_probe: Start touchscreen touchscreen in interrupt mode
<4>[    4.000313] key08_ts_probe: GPIO 84: 1
<4>[    4.000414] key08_ts_probe: Exit
<4>[    4.003691] GetBPPanic meta_proc gave us 0.
<6>[    4.009201] Freeing init memory: 152K
<4>[    4.009356] Warning: unable to open an initial console.
<3>[    4.373453] init: cannot open '/initlogo.rle'
<6>[    4.748229] yaffs: dev is 32505857 name is "mtdblock1"
<6>[    4.748298] yaffs: passed flags ""
<4>[    4.748329] yaffs: Attempting MTD mount on 31.1, "mtdblock1"
<4>[    4.942604] yaffs: restored from checkpoint
<4>[    4.943331] yaffs_read_super: isCheckpointed 1
<6>[    4.944498] yaffs: dev is 32505858 name is "mtdblock2"
<6>[    4.944551] yaffs: passed flags ""
<4>[    4.944581] yaffs: Attempting MTD mount on 31.2, "mtdblock2"
<4>[    4.968916] yaffs: restored from checkpoint
<4>[    4.969374] yaffs_read_super: isCheckpointed 1
<6>[    4.970154] yaffs: dev is 32505861 name is "mtdblock5"
<6>[    4.970206] yaffs: passed flags ""
<4>[    4.970364] yaffs: Attempting MTD mount on 31.5, "mtdblock5"
<4>[    4.986226] yaffs: restored from checkpoint
<4>[    4.986418] yaffs_read_super: isCheckpointed 1
<3>[    5.997316] init: service 'console' requires console
<6>[    6.005396] enabling adb function
<6>[    6.005466] usb_function_enable: name = adb, enable = 1
<6>[    6.005963] usb_lpm_exit(): USB exited from low power mode
<3>[    6.063731] init: cannot find '/system/bin/port_bridge', disabling 'port_bridge'
<6>[    6.123426] SMD: ch 38 CLOSED -> OPENING
<6>[    6.123556] SMD: ch 38 OPENING -> OPENED
<6>[    6.124198] SMD: ch 39 CLOSED -> OPENING
<6>[    6.124318] SMD: ch 39 OPENING -> OPENED
<6>[    6.125069] SMD: ch 40 CLOSED -> OPENING
<6>[    6.125186] SMD: ch 40 OPENING -> OPENED
<6>[    6.515273] warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>[    7.036829] ether_configure() 0
<6>[    7.037489] usb_set_composition: composition set to product id = 2d66
<3>[    7.038191] msm_hsusb_is_serial_num_null: rpc call success
<3>[    7.038909] msm_hsusb_send_serial_number: rpc call failed! error: -22
<3>[    7.039744] msm_hsusb_send_productID: rpc call success
<6>[    7.047579] msm_hsusb_phy_reset
<6>[    7.702264] usb_lpm_enter: usb in low power mode
<6>[    7.702323] hsusb: IDLE -> OFFLINE
<6>[    8.555358] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 15
<6>[    8.556624] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 15
<6>[    8.557763] [msm-audio:snd.c:snd_ioctl] snd_set_volume 12 0 15
<6>[    8.558719] [msm-audio:snd.c:snd_ioctl] snd_set_volume 3 0 15
<6>[    8.559671] [msm-audio:snd.c:snd_ioctl] snd_set_volume 5 0 15
<6>[    8.560696] [msm-audio:snd.c:snd_ioctl] snd_set_volume 4 0 15
<6>[    8.561566] [msm-audio:snd.c:snd_ioctl] snd_set_volume 8 0 15
<6>[    8.563001] [msm-audio:snd.c:snd_ioctl] snd_set_volume 9 0 15
<6>[    8.563964] [msm-audio:snd.c:snd_ioctl] snd_set_volume 10 0 15
<6>[    8.564929] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 15
<6>[    8.567178] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 15
<6>[    8.568169] [msm-audio:snd.c:snd_ioctl] snd_set_volume 22 0 15
<6>[    8.570208] [msm-audio:snd.c:snd_ioctl] snd_set_volume 23 0 15
<6>[    8.573236] [msm-audio:snd.c:snd_ioctl] snd_set_volume 6 0 15
<6>[    8.574156] [msm-audio:snd.c:snd_ioctl] snd_set_volume 27 0 15
<6>[    8.621918] [msm-audio:snd.c:snd_ioctl] snd_set_device 25 1 0
<6>[    8.627409] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 15
<6>[    8.628794] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 15
<6>[    8.629764] [msm-audio:snd.c:snd_ioctl] snd_set_volume 12 0 15
<6>[    8.631331] [msm-audio:snd.c:snd_ioctl] snd_set_volume 3 0 15
<6>[    8.632558] [msm-audio:snd.c:snd_ioctl] snd_set_volume 5 0 15
<6>[    8.633778] [msm-audio:snd.c:snd_ioctl] snd_set_volume 4 0 15
<6>[    8.635544] [msm-audio:snd.c:snd_ioctl] snd_set_volume 8 0 15
<6>[    8.636771] [msm-audio:snd.c:snd_ioctl] snd_set_volume 9 0 15
<6>[    8.638174] [msm-audio:snd.c:snd_ioctl] snd_set_volume 10 0 15
<6>[    8.639346] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 15
<6>[    8.640421] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 15
<6>[    8.642339] [msm-audio:snd.c:snd_ioctl] snd_set_volume 22 0 15
<6>[    8.643499] [msm-audio:snd.c:snd_ioctl] snd_set_volume 23 0 15
<6>[    8.644776] [msm-audio:snd.c:snd_ioctl] snd_set_volume 6 0 15
<6>[    8.645818] [msm-audio:snd.c:snd_ioctl] snd_set_volume 27 0 15
<6>[   11.623253] BLUETOOTH: bt_power: ON
<3>[   16.880941] init: untracked pid 201 exited
<6>[   24.013826] accel_open: open request from pid 208
<6>[   24.013893] accel_add_client: added client pid 208
<6>[   24.013978] accel_remove_client: removed client pid 208
<6>[   24.014161] accel_open: open request from pid 208
<6>[   24.014203] accel_add_client: added client pid 208
<6>[   24.014458] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[   24.014506] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[   24.014523] 
<6>[   24.030468] accel_i2c_set_config: setting poll_interval to 100ms
<6>[   24.070508] accel_remove_client: removed client pid 208
<6>[   24.261811] hw3d_open: pid 219 tid 225 opening client node
<4>[   24.303983] remapping device 1b3
<6>[   24.361271] hw3d_open: pid 208 tid 214 opening master node
<6>[   35.906214] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 9
<6>[   35.907139] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 9
<6>[   35.907931] [msm-audio:snd.c:snd_ioctl] snd_set_volume 12 0 9
<6>[   35.909031] [msm-audio:snd.c:snd_ioctl] snd_set_volume 3 0 9
<6>[   35.909881] [msm-audio:snd.c:snd_ioctl] snd_set_volume 5 0 9
<6>[   35.910659] [msm-audio:snd.c:snd_ioctl] snd_set_volume 4 0 9
<6>[   35.911401] [msm-audio:snd.c:snd_ioctl] snd_set_volume 8 0 9
<6>[   35.912146] [msm-audio:snd.c:snd_ioctl] snd_set_volume 9 0 9
<6>[   35.913156] [msm-audio:snd.c:snd_ioctl] snd_set_volume 10 0 9
<6>[   35.913956] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 9
<6>[   35.914688] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 9
<6>[   35.915428] [msm-audio:snd.c:snd_ioctl] snd_set_volume 22 0 9
<6>[   35.916223] [msm-audio:snd.c:snd_ioctl] snd_set_volume 23 0 9
<6>[   35.917253] [msm-audio:snd.c:snd_ioctl] snd_set_volume 6 0 9
<6>[   35.918046] [msm-audio:snd.c:snd_ioctl] snd_set_volume 27 0 9
<6>[   36.666806] request_suspend_state: wakeup (3->0) at 36666550064 (2011-08-09 10:36:47.364343338 UTC)
<6>[   36.692138] lm3535_brightness_set: lcd-backlight, 0x66 (102)
<6>[   36.692179] <6>lm3535_convert_value: v=102, z=0, res=0x303e1130, reg=0x50
<6>[   36.694779] lm3535_brightness_set: zone 0, 0x79 => 0x50, 41 steps, ramp time 123000us
<6>[   40.872728] accel_open: open request from pid 237
<6>[   40.872763] accel_add_client: added client pid 237
<6>[   40.873128] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[   40.873168] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[   40.873183] 
<6>[   40.873666] accel_i2c_set_config: setting poll_interval to 100ms
<6>[   40.886631] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[   40.900909] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[   40.900934] 
<6>[   40.906238] accel_i2c_set_config: setting poll_interval to 100ms
<6>[   40.910961] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[   40.911006] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[   40.911021] 
<6>[   40.911516] accel_i2c_set_config: setting poll_interval to 100ms
<6>[   41.030098] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[   41.039878] lm3535_brightness_set: lcd-backlight, 0x65 (101)
<6>[   41.039916] <6>lm3535_convert_value: v=101, z=0, res=0x30213e48, reg=0x50
<6>[   41.040504] lm3535_brightness_set: zone 0, 0x50 => 0x50, 0 steps, ramp time 0us
<6>[   41.060923] lm3535_brightness_set: lcd-backlight, 0x64 (100)
<6>[   41.060994] <6>lm3535_convert_value: v=100, z=0, res=0x30047b00, reg=0x50
<6>[   41.061494] lm3535_brightness_set: zone 0, 0x50 => 0x50, 0 steps, ramp time 0us
<6>[   41.081461] lm3535_brightness_set: lcd-backlight, 0x63 (99)
<6>[   41.081579] <6>lm3535_convert_value: v=99, z=0, res=0x2fe7c758, reg=0x50
<6>[   41.082513] lm3535_brightness_set: zone 0, 0x50 => 0x50, 0 steps, ramp time 0us
<6>[   41.100901] lm3535_brightness_set: lcd-backlight, 0x62 (98)
<6>[   41.100974] <6>lm3535_convert_value: v=98, z=0, res=0x2fcb2350, reg=0x50
<6>[   41.106838] lm3535_brightness_set: zone 0, 0x50 => 0x50, 0 steps, ramp time 0us
<6>[   41.125656] lm3535_brightness_set: lcd-backlight, 0x61 (97)
<6>[   41.125791] <6>lm3535_convert_value: v=97, z=0, res=0x2fae8ee8, reg=0x4f
<6>[   41.130718] lm3535_brightness_set: zone 0, 0x50 => 0x4f, 1 steps, ramp time 50000us
<6>[   41.151001] lm3535_brightness_set: lcd-backlight, 0x60 (96)
<6>[   41.151044] <6>lm3535_convert_value: v=96, z=0, res=0x2f920a20, reg=0x4f
<6>[   41.151869] lm3535_brightness_set: zone 0, 0x4f => 0x4f, 0 steps, ramp time 0us
<6>[   41.171079] lm3535_brightness_set: lcd-backlight, 0x5f (95)
<6>[   41.171151] <6>lm3535_convert_value: v=95, z=0, res=0x2f7594f8, reg=0x4f
<6>[   41.171679] lm3535_brightness_set: zone 0, 0x4f => 0x4f, 0 steps, ramp time 0us
<6>[   41.224744] lm3535_brightness_set: lcd-backlight, 0x5e (94)
<6>[   41.224786] <6>lm3535_convert_value: v=94, z=0, res=0x2f592f70, reg=0x4f
<6>[   41.225203] lm3535_brightness_set: zone 0, 0x4f => 0x4f, 0 steps, ramp time 0us
<6>[   41.240919] lm3535_brightness_set: lcd-backlight, 0x5d (93)
<6>[   41.240993] <6>lm3535_convert_value: v=93, z=0, res=0x2f3cd988, reg=0x4f
<6>[   41.250541] lm3535_brightness_set: zone 0, 0x4f => 0x4f, 0 steps, ramp time 0us
<6>[   41.260881] lm3535_brightness_set: lcd-backlight, 0x5c (92)
<6>[   41.260953] <6>lm3535_convert_value: v=92, z=0, res=0x2f209340, reg=0x4f
<6>[   41.261448] lm3535_brightness_set: zone 0, 0x4f => 0x4f, 0 steps, ramp time 0us
<6>[   41.280906] lm3535_brightness_set: lcd-backlight, 0x5b (91)
<6>[   41.280974] <6>lm3535_convert_value: v=91, z=0, res=0x2f045c98, reg=0x4e
<6>[   41.281604] lm3535_brightness_set: zone 0, 0x4f => 0x4e, 1 steps, ramp time 50000us
<6>[   41.300884] lm3535_brightness_set: lcd-backlight, 0x5a (90)
<6>[   41.300959] <6>lm3535_convert_value: v=90, z=0, res=0x2ee83590, reg=0x4e
<6>[   41.301904] lm3535_brightness_set: zone 0, 0x4e => 0x4e, 0 steps, ramp time 0us
<6>[   41.320889] lm3535_brightness_set: lcd-backlight, 0x59 (89)
<6>[   41.320931] <6>lm3535_convert_value: v=89, z=0, res=0x2ecc1e28, reg=0x4e
<6>[   41.321453] lm3535_brightness_set: zone 0, 0x4e => 0x4e, 0 steps, ramp time 0us
<6>[   41.351113] lm3535_brightness_set: lcd-backlight, 0x58 (88)
<6>[   41.351184] <6>lm3535_convert_value: v=88, z=0, res=0x2eb01660, reg=0x4e
<6>[   41.352168] lm3535_brightness_set: zone 0, 0x4e => 0x4e, 0 steps, ramp time 0us
<6>[   41.390874] lm3535_brightness_set: lcd-backlight, 0x57 (87)
<6>[   41.390916] <6>lm3535_convert_value: v=87, z=0, res=0x2e941e38, reg=0x4e
<6>[   41.391364] lm3535_brightness_set: zone 0, 0x4e => 0x4e, 0 steps, ramp time 0us
<6>[   41.411379] lm3535_brightness_set: lcd-backlight, 0x56 (86)
<6>[   41.411453] <6>lm3535_convert_value: v=86, z=0, res=0x2e7835b0, reg=0x4d
<6>[   41.418234] lm3535_brightness_set: zone 0, 0x4e => 0x4d, 1 steps, ramp time 50000us
<6>[   41.430929] lm3535_brightness_set: lcd-backlight, 0x55 (85)
<6>[   41.431003] <6>lm3535_convert_value: v=85, z=0, res=0x2e5c5cc8, reg=0x4d
<6>[   41.431683] lm3535_brightness_set: zone 0, 0x4d => 0x4d, 0 steps, ramp time 0us
<6>[   41.450868] lm3535_brightness_set: lcd-backlight, 0x54 (84)
<6>[   41.450909] <6>lm3535_convert_value: v=84, z=0, res=0x2e409380, reg=0x4d
<6>[   41.460756] lm3535_brightness_set: zone 0, 0x4d => 0x4d, 0 steps, ramp time 0us
<6>[   41.466856] lm3535_brightness_set: lcd-backlight, 0x53 (83)
<6>[   41.466928] <6>lm3535_convert_value: v=83, z=0, res=0x2e24d9d8, reg=0x4d
<6>[   41.468158] lm3535_brightness_set: zone 0, 0x4d => 0x4d, 0 steps, ramp time 0us
<6>[   41.490909] lm3535_brightness_set: lcd-backlight, 0x52 (82)
<6>[   41.490953] <6>lm3535_convert_value: v=82, z=0, res=0x2e092fd0, reg=0x4d
<6>[   41.493018] lm3535_brightness_set: zone 0, 0x4d => 0x4d, 0 steps, ramp time 0us
<6>[   41.530933] lm3535_brightness_set: lcd-backlight, 0x51 (81)
<6>[   41.531006] <6>lm3535_convert_value: v=81, z=0, res=0x2ded9568, reg=0x4d
<6>[   41.540618] lm3535_brightness_set: zone 0, 0x4d => 0x4d, 0 steps, ramp time 0us
<6>[   41.550841] lm3535_brightness_set: lcd-backlight, 0x50 (80)
<6>[   41.550881] <6>lm3535_convert_value: v=80, z=0, res=0x2dd20aa0, reg=0x4c
<6>[   41.554428] lm3535_brightness_set: zone 0, 0x4d => 0x4c, 1 steps, ramp time 50000us
<6>[   41.570901] lm3535_brightness_set: lcd-backlight, 0x4f (79)
<6>[   41.570974] <6>lm3535_convert_value: v=79, z=0, res=0x2db68f78, reg=0x4c
<6>[   41.576944] lm3535_brightness_set: zone 0, 0x4c => 0x4c, 0 steps, ramp time 0us
<6>[   41.801816] lm3535_brightness_set: lcd-backlight, 0x4e (78)
<6>[   41.801893] <6>lm3535_convert_value: v=78, z=0, res=0x2d9b23f0, reg=0x4c
<6>[   41.802736] lm3535_brightness_set: zone 0, 0x4c => 0x4c, 0 steps, ramp time 0us
<6>[   41.820871] lm3535_brightness_set: lcd-backlight, 0x4d (77)
<6>[   41.820944] <6>lm3535_convert_value: v=77, z=0, res=0x2d7fc808, reg=0x4c
<6>[   41.822203] lm3535_brightness_set: zone 0, 0x4c => 0x4c, 0 steps, ramp time 0us
<6>[   41.840903] lm3535_brightness_set: lcd-backlight, 0x4c (76)
<6>[   41.840976] <6>lm3535_convert_value: v=76, z=0, res=0x2d647bc0, reg=0x4c
<6>[   41.841456] lm3535_brightness_set: zone 0, 0x4c => 0x4c, 0 steps, ramp time 0us
<6>[   41.860906] lm3535_brightness_set: lcd-backlight, 0x4b (75)
<6>[   41.860951] <6>lm3535_convert_value: v=75, z=0, res=0x2d493f18, reg=0x4b
<6>[   41.870986] lm3535_brightness_set: zone 0, 0x4c => 0x4b, 1 steps, ramp time 50000us
<6>[   41.900976] lm3535_brightness_set: lcd-backlight, 0x4a (74)
<6>[   41.901051] <6>lm3535_convert_value: v=74, z=0, res=0x2d2e1210, reg=0x4b
<6>[   41.910439] lm3535_brightness_set: zone 0, 0x4b => 0x4b, 0 steps, ramp time 0us
<6>[   41.920868] lm3535_brightness_set: lcd-backlight, 0x49 (73)
<6>[   41.920943] <6>lm3535_convert_value: v=73, z=0, res=0x2d12f4a8, reg=0x4b
<6>[   41.921448] lm3535_brightness_set: zone 0, 0x4b => 0x4b, 0 steps, ramp time 0us
<6>[   41.938496] lm3535_brightness_set: lcd-backlight, 0x48 (72)
<6>[   41.938568] <6>lm3535_convert_value: v=72, z=0, res=0x2cf7e6e0, reg=0x4b
<6>[   41.939141] lm3535_brightness_set: zone 0, 0x4b => 0x4b, 0 steps, ramp time 0us
<6>[   41.960919] lm3535_brightness_set: lcd-backlight, 0x47 (71)
<6>[   41.960961] <6>lm3535_convert_value: v=71, z=0, res=0x2cdce8b8, reg=0x4b
<6>[   41.961681] lm3535_brightness_set: zone 0, 0x4b => 0x4b, 0 steps, ramp time 0us
<6>[   41.980939] lm3535_brightness_set: lcd-backlight, 0x46 (70)
<6>[   41.981013] <6>lm3535_convert_value: v=70, z=0, res=0x2cc1fa30, reg=0x4b
<6>[   41.992656] lm3535_brightness_set: zone 0, 0x4b => 0x4b, 0 steps, ramp time 0us
<6>[   42.000886] lm3535_brightness_set: lcd-backlight, 0x45 (69)
<6>[   42.000926] <6>lm3535_convert_value: v=69, z=0, res=0x2ca71b48, reg=0x4a
<6>[   42.011304] lm3535_brightness_set: zone 0, 0x4b => 0x4a, 1 steps, ramp time 50000us
<6>[   42.040953] lm3535_brightness_set: lcd-backlight, 0x44 (68)
<6>[   42.041023] <6>lm3535_convert_value: v=68, z=0, res=0x2c8c4c00, reg=0x4a
<6>[   42.041621] lm3535_brightness_set: zone 0, 0x4a => 0x4a, 0 steps, ramp time 0us
<6>[   42.060898] lm3535_brightness_set: lcd-backlight, 0x43 (67)
<6>[   42.060938] <6>lm3535_convert_value: v=67, z=0, res=0x2c718c58, reg=0x4a
<6>[   42.063961] lm3535_brightness_set: zone 0, 0x4a => 0x4a, 0 steps, ramp time 0us
<6>[   42.080898] lm3535_brightness_set: lcd-backlight, 0x42 (66)
<6>[   42.080969] <6>lm3535_convert_value: v=66, z=0, res=0x2c56dc50, reg=0x4a
<6>[   42.094276] lm3535_brightness_set: zone 0, 0x4a => 0x4a, 0 steps, ramp time 0us
<6>[   42.100104] lm3535_brightness_set: lcd-backlight, 0x41 (65)
<6>[   42.100176] <6>lm3535_convert_value: v=65, z=0, res=0x2c3c3be8, reg=0x4a
<6>[   42.101051] lm3535_brightness_set: zone 0, 0x4a => 0x4a, 0 steps, ramp time 0us
<6>[   42.120923] lm3535_brightness_set: lcd-backlight, 0x40 (64)
<6>[   42.120994] <6>lm3535_convert_value: v=64, z=0, res=0x2c21ab20, reg=0x4a
<6>[   42.128334] lm3535_brightness_set: zone 0, 0x4a => 0x4a, 0 steps, ramp time 0us
<6>[   42.143779] lm3535_brightness_set: lcd-backlight, 0x3f (63)
<6>[   42.143854] <6>lm3535_convert_value: v=63, z=0, res=0x2c0729f8, reg=0x49
<6>[   42.144746] lm3535_brightness_set: zone 0, 0x4a => 0x49, 1 steps, ramp time 50000us
<6>[   42.160923] lm3535_brightness_set: lcd-backlight, 0x3e (62)
<6>[   42.160963] <6>lm3535_convert_value: v=62, z=0, res=0x2becb870, reg=0x49
<6>[   42.161834] lm3535_brightness_set: zone 0, 0x49 => 0x49, 0 steps, ramp time 0us
<6>[   42.200939] lm3535_brightness_set: lcd-backlight, 0x3d (61)
<6>[   42.201011] <6>lm3535_convert_value: v=61, z=0, res=0x2bd25688, reg=0x49
<6>[   42.201506] lm3535_brightness_set: zone 0, 0x49 => 0x49, 0 steps, ramp time 0us
<6>[   42.220901] lm3535_brightness_set: lcd-backlight, 0x3c (60)
<6>[   42.220973] <6>lm3535_convert_value: v=60, z=0, res=0x2bb80440, reg=0x49
<6>[   42.241329] lm3535_brightness_set: zone 0, 0x49 => 0x49, 0 steps, ramp time 0us
<6>[   42.242901] lm3535_brightness_set: lcd-backlight, 0x3b (59)
<6>[   42.242939] <6>lm3535_convert_value: v=59, z=0, res=0x2b9dc198, reg=0x49
<6>[   42.250438] lm3535_brightness_set: zone 0, 0x49 => 0x49, 0 steps, ramp time 0us
<6>[   42.260944] lm3535_brightness_set: lcd-backlight, 0x3a (58)
<6>[   42.261018] <6>lm3535_convert_value: v=58, z=0, res=0x2b838e90, reg=0x49
<6>[   42.263199] lm3535_brightness_set: zone 0, 0x49 => 0x49, 0 steps, ramp time 0us
<6>[   42.293353] lm3535_brightness_set: lcd-backlight, 0x39 (57)
<6>[   42.293426] <6>lm3535_convert_value: v=57, z=0, res=0x2b696b28, reg=0x48
<6>[   42.293956] lm3535_brightness_set: zone 0, 0x49 => 0x48, 1 steps, ramp time 50000us
<6>[   42.310943] lm3535_brightness_set: lcd-backlight, 0x38 (56)
<6>[   42.311016] <6>lm3535_convert_value: v=56, z=0, res=0x2b4f5760, reg=0x48
<6>[   42.311488] lm3535_brightness_set: zone 0, 0x48 => 0x48, 0 steps, ramp time 0us
<6>[   42.350908] lm3535_brightness_set: lcd-backlight, 0x37 (55)
<6>[   42.350981] <6>lm3535_convert_value: v=55, z=0, res=0x2b355338, reg=0x48
<6>[   42.352499] lm3535_brightness_set: zone 0, 0x48 => 0x48, 0 steps, ramp time 0us
<6>[   42.371149] lm3535_brightness_set: lcd-backlight, 0x36 (54)
<6>[   42.371191] <6>lm3535_convert_value: v=54, z=0, res=0x2b1b5eb0, reg=0x48
<6>[   42.371698] lm3535_brightness_set: zone 0, 0x48 => 0x48, 0 steps, ramp time 0us
<6>[   42.390896] lm3535_brightness_set: lcd-backlight, 0x35 (53)
<6>[   42.390938] <6>lm3535_convert_value: v=53, z=0, res=0x2b0179c8, reg=0x48
<6>[   42.400583] lm3535_brightness_set: zone 0, 0x48 => 0x48, 0 steps, ramp time 0us
<6>[   42.415361] lm3535_brightness_set: lcd-backlight, 0x34 (52)
<6>[   42.415401] <6>lm3535_convert_value: v=52, z=0, res=0x2ae7a480, reg=0x47
<6>[   42.424391] lm3535_brightness_set: zone 0, 0x48 => 0x47, 1 steps, ramp time 50000us
<6>[   42.431086] lm3535_brightness_set: lcd-backlight, 0x33 (51)
<6>[   42.431129] <6>lm3535_convert_value: v=51, z=0, res=0x2acdded8, reg=0x47
<6>[   42.436878] lm3535_brightness_set: zone 0, 0x47 => 0x47, 0 steps, ramp time 0us
<6>[   42.450906] lm3535_brightness_set: lcd-backlight, 0x32 (50)
<6>[   42.450983] <6>lm3535_convert_value: v=50, z=0, res=0x2ab428d0, reg=0x47
<6>[   42.451488] lm3535_brightness_set: zone 0, 0x47 => 0x47, 0 steps, ramp time 0us
<6>[   48.151786] hw3d_release: in release for pid=51 tid=51
<3>[   60.450448] Client Status: RevReq=0, CrcErr=1
<6>[  101.122578] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[  101.124549] lm3535_brightness_set: lcd-backlight, 0x2f (47)
<6>[  101.124723] <6>lm3535_convert_value: v=47, z=0, res=0x2a676478, reg=0x47
<6>[  101.125391] lm3535_brightness_set: zone 0, 0x47 => 0x47, 0 steps, ramp time 0us
<6>[  101.141304] lm3535_brightness_set: lcd-backlight, 0x2d (45)
<6>[  101.141478] <6>lm3535_convert_value: v=45, z=0, res=0x2a348508, reg=0x46
<6>[  101.142114] lm3535_brightness_set: zone 0, 0x47 => 0x46, 1 steps, ramp time 50000us
<6>[  101.161453] lm3535_brightness_set: lcd-backlight, 0x2b (43)
<6>[  101.161633] <6>lm3535_convert_value: v=43, z=0, res=0x2a01e418, reg=0x46
<6>[  101.162288] lm3535_brightness_set: zone 0, 0x46 => 0x46, 0 steps, ramp time 0us
<6>[  101.181281] lm3535_brightness_set: lcd-backlight, 0x28 (40)
<6>[  101.181454] <6>lm3535_convert_value: v=40, z=0, res=0x29b667e0, reg=0x45
<6>[  101.182098] lm3535_brightness_set: zone 0, 0x46 => 0x45, 1 steps, ramp time 50000us
<6>[  101.201294] lm3535_brightness_set: lcd-backlight, 0x26 (38)
<6>[  101.201471] <6>lm3535_convert_value: v=38, z=0, res=0x29846330, reg=0x45
<6>[  101.202119] lm3535_brightness_set: zone 0, 0x45 => 0x45, 0 steps, ramp time 0us
<6>[  101.221284] lm3535_brightness_set: lcd-backlight, 0x24 (36)
<6>[  101.221454] <6>lm3535_convert_value: v=36, z=0, res=0x29529d00, reg=0x45
<6>[  101.222084] lm3535_brightness_set: zone 0, 0x45 => 0x45, 0 steps, ramp time 0us
<6>[  101.241348] lm3535_brightness_set: lcd-backlight, 0x21 (33)
<6>[  101.241528] <6>lm3535_convert_value: v=33, z=0, res=0x290868e8, reg=0x44
<6>[  101.242184] lm3535_brightness_set: zone 0, 0x45 => 0x44, 1 steps, ramp time 50000us
<6>[  101.261511] lm3535_brightness_set: lcd-backlight, 0x1f (31)
<6>[  101.261693] <6>lm3535_convert_value: v=31, z=0, res=0x28d73ef8, reg=0x44
<6>[  101.262343] lm3535_brightness_set: zone 0, 0x44 => 0x44, 0 steps, ramp time 0us
<6>[  101.281298] lm3535_brightness_set: lcd-backlight, 0x1d (29)
<6>[  101.281464] <6>lm3535_convert_value: v=29, z=0, res=0x28a65388, reg=0x44
<6>[  101.282104] lm3535_brightness_set: zone 0, 0x44 => 0x44, 0 steps, ramp time 0us
<6>[  101.301423] lm3535_brightness_set: lcd-backlight, 0x1a (26)
<6>[  101.301606] <6>lm3535_convert_value: v=26, z=0, res=0x285d6790, reg=0x43
<6>[  101.302251] lm3535_brightness_set: zone 0, 0x44 => 0x43, 1 steps, ramp time 50000us
<6>[  101.321283] lm3535_brightness_set: lcd-backlight, 0x18 (24)
<6>[  101.321456] <6>lm3535_convert_value: v=24, z=0, res=0x282d1860, reg=0x43
<6>[  101.322093] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  101.341274] lm3535_brightness_set: lcd-backlight, 0x16 (22)
<6>[  101.341449] <6>lm3535_convert_value: v=22, z=0, res=0x27fd07b0, reg=0x43
<6>[  101.342091] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  101.361458] lm3535_brightness_set: lcd-backlight, 0x14 (20)
<6>[  101.361636] <6>lm3535_convert_value: v=20, z=0, res=0x27cd3580, reg=0x42
<6>[  101.362289] lm3535_brightness_set: zone 0, 0x43 => 0x42, 1 steps, ramp time 50000us
<6>[  108.157419] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  108.157993] lm3535_brightness_set: zone 0, 0x42 => 0x0, 66 steps, ramp time 198000us
<6>[  108.188248] request_suspend_state: sleep (0->3) at 108187991726 (2011-08-09 10:37:58.885785000 UTC)
<6>[  108.189948] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  108.190411] accel_i2c_set_config: mode=0 (power off), odr=0 (10Hz), fs=0, interval=0
<6>[  108.190436] 
<6>[  108.193069] accel_suspend: driver suspended
<6>[  108.195914] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  108.195979] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  108.196078] accel_remove_client: removed client pid 237
<6>[  108.214234] keypad_leds_suspend: driver suspended, event = 2
<6>[  108.320426] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  108.320646] pm7540_btn_leds_suspend: driver suspended, event = 2
<6>[  108.320683] lm3535_suspend: called with pm message 2
<6>[  108.320711] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  108.324941] lm3535_brightness_set: zone 0, 0x0 => 0x0, 0 steps, ramp time 0us
<4>[  109.171913] save exit: isCheckpointed 1
<4>[  109.189308] save exit: isCheckpointed 1
<6>[  109.225773] usb_platform_suspend: we are already in lpm, nothing to be done
<6>[  109.225773] get_smem_clock: exit timeout state 10d29 clock 4040376
<6>[  109.225773] wakeup wake lock: event6-208
<6>[  109.225933] hw3d_resume: resuming
<6>[  109.226343] get_smem_clock: invalid start state 10d29 clock 4040376
<6>[  109.326873] request_suspend_state: wakeup (3->0) at 109327323394 (2011-08-09 10:38:01.530108334 UTC)
<6>[  109.334959] suspend: exit suspend, ret = 0 (2011-08-09 10:38:01.538205001 UTC)
<6>[  109.371289] accel_open: open request from pid 237
<6>[  109.371354] accel_add_client: added client pid 237
<6>[  109.371623] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  109.371668] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  109.372986] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  109.373046] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  109.373458] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  109.373508] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  109.669863] lm3535_resume: resuming
<6>[  110.060058] lm3535_configure: ALS Register: 0xf8, zone 0
<6>[  110.060216] pm7540_btn_als_changed: ALS zone changed: 0 => 0
<6>[  110.063463] lm3535_brightness_set: lcd-backlight, 0x32 (50)
<6>[  110.064146] <6>lm3535_convert_value: v=50, z=0, res=0x2ab428d0, reg=0x47
<6>[  110.064753] lm3535_brightness_set: zone 0, 0x0 => 0x47, 71 steps, ramp time 106500us
<6>[  110.065313] lm3535_resume: driver resumed
<6>[  110.065431] pm7540_btn_leds_resume: resuming, ALS zone is 0, value 255
<6>[  110.065566] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[  110.449799] keypad_leds_resume: resuming, ALS zone is 0, values 0 0 0
<6>[  110.451511] keypad_leds_resume: driver resumed
<6>[  110.451689] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[  110.451758] 
<6>[  110.452471] accel_i2c_set_config: setting poll_interval to 100ms
<6>[  110.454991] accel_resume: driver resumed
<6>[  119.535743] usb_lpm_exit(): USB exited from low power mode
<6>[  119.538209] usb cable connected
<6>[  119.633393] msm_hsusb_phy_reset
<6>[  119.763101] hsusb suspend interrupt
<6>[  128.849784] hsusb: OFFLINE -> ONLINE
<6>[  128.871416] usb_lpm_enter: usb in low power mode
<6>[  146.565693] usb_lpm_exit(): USB exited from low power mode
<6>[  146.568843] usb cable disconnected
<6>[  146.570294] msm_chg_usb_i_is_not_available
<6>[  146.572319] msm_chg_usb_charger_disconnected
<6>[  146.577956] msm_hsusb_phy_reset
<6>[  146.700868] usb_lpm_enter: usb in low power mode
<6>[  146.700956] hsusb: ONLINE -> OFFLINE
<6>[  156.811999] usb_lpm_exit(): USB exited from low power mode
<6>[  156.815113] usb cable connected
<6>[  156.913321] msm_hsusb_phy_reset
<6>[  157.043049] hsusb suspend interrupt
<6>[  166.040183] hsusb: OFFLINE -> ONLINE
<6>[  166.060248] usb_lpm_enter: usb in low power mode
<6>[  200.332579] usb_lpm_exit(): USB exited from low power mode
<6>[  200.335183] usb cable disconnected
<6>[  200.336571] msm_chg_usb_i_is_not_available
<6>[  200.338603] msm_chg_usb_charger_disconnected
<6>[  200.350409] msm_hsusb_phy_reset
<6>[  200.489834] usb_lpm_enter: usb in low power mode
<6>[  200.489936] hsusb: ONLINE -> OFFLINE
<6>[  253.491456] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[  253.493754] lm3535_brightness_set: lcd-backlight, 0x2f (47)
<6>[  253.493929] <6>lm3535_convert_value: v=47, z=0, res=0x2a676478, reg=0x47
<6>[  253.497584] lm3535_brightness_set: zone 0, 0x47 => 0x47, 0 steps, ramp time 0us
<6>[  253.510308] lm3535_brightness_set: lcd-backlight, 0x2d (45)
<6>[  253.510404] <6>lm3535_convert_value: v=45, z=0, res=0x2a348508, reg=0x46
<6>[  253.510893] lm3535_brightness_set: zone 0, 0x47 => 0x46, 1 steps, ramp time 50000us
<6>[  253.530219] lm3535_brightness_set: lcd-backlight, 0x2b (43)
<6>[  253.530316] <6>lm3535_convert_value: v=43, z=0, res=0x2a01e418, reg=0x46
<6>[  253.530793] lm3535_brightness_set: zone 0, 0x46 => 0x46, 0 steps, ramp time 0us
<6>[  253.550194] lm3535_brightness_set: lcd-backlight, 0x28 (40)
<6>[  253.550289] <6>lm3535_convert_value: v=40, z=0, res=0x29b667e0, reg=0x45
<6>[  253.550763] lm3535_brightness_set: zone 0, 0x46 => 0x45, 1 steps, ramp time 50000us
<6>[  253.570293] lm3535_brightness_set: lcd-backlight, 0x26 (38)
<6>[  253.570398] <6>lm3535_convert_value: v=38, z=0, res=0x29846330, reg=0x45
<6>[  253.570874] lm3535_brightness_set: zone 0, 0x45 => 0x45, 0 steps, ramp time 0us
<6>[  253.590323] lm3535_brightness_set: lcd-backlight, 0x24 (36)
<6>[  253.590424] <6>lm3535_convert_value: v=36, z=0, res=0x29529d00, reg=0x45
<6>[  253.590911] lm3535_brightness_set: zone 0, 0x45 => 0x45, 0 steps, ramp time 0us
<6>[  253.610641] lm3535_brightness_set: lcd-backlight, 0x21 (33)
<6>[  253.610816] <6>lm3535_convert_value: v=33, z=0, res=0x290868e8, reg=0x44
<6>[  253.611473] lm3535_brightness_set: zone 0, 0x45 => 0x44, 1 steps, ramp time 50000us
<6>[  253.630639] lm3535_brightness_set: lcd-backlight, 0x1f (31)
<6>[  253.630819] <6>lm3535_convert_value: v=31, z=0, res=0x28d73ef8, reg=0x44
<6>[  253.631506] lm3535_brightness_set: zone 0, 0x44 => 0x44, 0 steps, ramp time 0us
<6>[  253.650596] lm3535_brightness_set: lcd-backlight, 0x1d (29)
<6>[  253.650773] <6>lm3535_convert_value: v=29, z=0, res=0x28a65388, reg=0x44
<6>[  253.651429] lm3535_brightness_set: zone 0, 0x44 => 0x44, 0 steps, ramp time 0us
<6>[  253.670648] lm3535_brightness_set: lcd-backlight, 0x1a (26)
<6>[  253.670824] <6>lm3535_convert_value: v=26, z=0, res=0x285d6790, reg=0x43
<6>[  253.671473] lm3535_brightness_set: zone 0, 0x44 => 0x43, 1 steps, ramp time 50000us
<6>[  253.690809] lm3535_brightness_set: lcd-backlight, 0x18 (24)
<6>[  253.690994] <6>lm3535_convert_value: v=24, z=0, res=0x282d1860, reg=0x43
<6>[  253.691663] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  253.710709] lm3535_brightness_set: lcd-backlight, 0x16 (22)
<6>[  253.710889] <6>lm3535_convert_value: v=22, z=0, res=0x27fd07b0, reg=0x43
<6>[  253.711546] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  253.730638] lm3535_brightness_set: lcd-backlight, 0x14 (20)
<6>[  253.730823] <6>lm3535_convert_value: v=20, z=0, res=0x27cd3580, reg=0x42
<6>[  253.731493] lm3535_brightness_set: zone 0, 0x43 => 0x42, 1 steps, ramp time 50000us
<6>[  260.524931] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  260.525514] lm3535_brightness_set: zone 0, 0x42 => 0x0, 66 steps, ramp time 198000us
<6>[  260.564441] request_suspend_state: sleep (0->3) at 260564893414 (2011-08-09 10:40:32.767680020 UTC)
<6>[  260.565998] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  260.566504] accel_i2c_set_config: mode=0 (power off), odr=0 (10Hz), fs=0, interval=0
<6>[  260.566529] 
<6>[  260.570811] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  260.570874] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  260.570971] accel_remove_client: removed client pid 237
<6>[  260.609709] accel_suspend: driver suspended
<6>[  260.619699] keypad_leds_suspend: driver suspended, event = 2
<6>[  260.699608] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  260.699779] pm7540_btn_leds_suspend: driver suspended, event = 2
<6>[  260.699814] lm3535_suspend: called with pm message 2
<6>[  260.699841] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  260.700246] lm3535_brightness_set: zone 0, 0x0 => 0x0, 0 steps, ramp time 0us
<4>[  261.221108] save exit: isCheckpointed 1
<6>[  261.255519] usb_platform_suspend: we are already in lpm, nothing to be done
<6>[  261.255519] get_smem_clock: exit timeout state 10d29 clock 9022198
<6>[  261.255519] get_smem_clock: invalid start state 10d29 clock 9022198
<6>[  261.255519] hw3d_resume: resuming
<6>[  261.323538] wakeup wake lock: mmc_delayed_work
<6>[  261.353669] suspend: exit suspend, ret = 0 (2011-08-09 10:40:37.527401667 UTC)
<6>[  262.199974] usb_platform_suspend: we are already in lpm, nothing to be done
<6>[  262.199974] get_smem_clock: exit timeout state 10d29 clock 9184410
<6>[  262.199974] get_smem_clock: invalid start state 10d29 clock 9184410
<6>[  262.200656] wakeup wake lock: SMD_RPCCALL
<6>[  262.308078] suspend: exit suspend, ret = 0 (2011-08-09 11:11:32.532665001 UTC)
<6>[  264.026923] request_suspend_state: wakeup (3->0) at 264029013452 (2011-08-09 11:11:34.251495028 UTC)
<6>[  264.061164] accel_open: open request from pid 237
<6>[  264.061231] accel_add_client: added client pid 237
<6>[  264.061499] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  264.061543] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  264.062858] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  264.062916] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  264.063328] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  264.063379] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  264.426984] lm3535_resume: resuming
<6>[  264.829421] lm3535_configure: ALS Register: 0xf8, zone 0
<6>[  264.829493] pm7540_btn_als_changed: ALS zone changed: 0 => 0
<6>[  264.830741] lm3535_brightness_set: lcd-backlight, 0x32 (50)
<6>[  264.834506] <6>lm3535_convert_value: v=50, z=0, res=0x2ab428d0, reg=0x47
<6>[  264.838043] lm3535_brightness_set: zone 0, 0x0 => 0x47, 71 steps, ramp time 106500us
<6>[  264.848078] lm3535_resume: driver resumed
<6>[  264.848118] pm7540_btn_leds_resume: resuming, ALS zone is 0, value 255
<6>[  264.848156] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[  265.268003] keypad_leds_resume: resuming, ALS zone is 0, values 0 0 0
<6>[  265.269179] keypad_leds_resume: driver resumed
<6>[  265.269248] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[  265.269264] 
<6>[  265.269678] accel_i2c_set_config: setting poll_interval to 100ms
<6>[  265.271384] accel_resume: driver resumed
<6>[  318.889744] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[  318.891683] lm3535_brightness_set: lcd-backlight, 0x2f (47)
<6>[  318.891853] <6>lm3535_convert_value: v=47, z=0, res=0x2a676478, reg=0x47
<6>[  318.892516] lm3535_brightness_set: zone 0, 0x47 => 0x47, 0 steps, ramp time 0us
<6>[  318.908988] lm3535_brightness_set: lcd-backlight, 0x2d (45)
<6>[  318.909166] <6>lm3535_convert_value: v=45, z=0, res=0x2a348508, reg=0x46
<6>[  318.909814] lm3535_brightness_set: zone 0, 0x47 => 0x46, 1 steps, ramp time 50000us
<6>[  318.928973] lm3535_brightness_set: lcd-backlight, 0x2b (43)
<6>[  318.929146] <6>lm3535_convert_value: v=43, z=0, res=0x2a01e418, reg=0x46
<6>[  318.929786] lm3535_brightness_set: zone 0, 0x46 => 0x46, 0 steps, ramp time 0us
<6>[  318.949221] lm3535_brightness_set: lcd-backlight, 0x28 (40)
<6>[  318.949396] <6>lm3535_convert_value: v=40, z=0, res=0x29b667e0, reg=0x45
<6>[  318.953711] lm3535_brightness_set: zone 0, 0x46 => 0x45, 1 steps, ramp time 50000us
<6>[  318.968978] lm3535_brightness_set: lcd-backlight, 0x26 (38)
<6>[  318.969153] <6>lm3535_convert_value: v=38, z=0, res=0x29846330, reg=0x45
<6>[  318.969803] lm3535_brightness_set: zone 0, 0x45 => 0x45, 0 steps, ramp time 0us
<6>[  318.989011] lm3535_brightness_set: lcd-backlight, 0x24 (36)
<6>[  318.989193] <6>lm3535_convert_value: v=36, z=0, res=0x29529d00, reg=0x45
<6>[  318.989851] lm3535_brightness_set: zone 0, 0x45 => 0x45, 0 steps, ramp time 0us
<6>[  319.009028] lm3535_brightness_set: lcd-backlight, 0x21 (33)
<6>[  319.009201] <6>lm3535_convert_value: v=33, z=0, res=0x290868e8, reg=0x44
<6>[  319.009853] lm3535_brightness_set: zone 0, 0x45 => 0x44, 1 steps, ramp time 50000us
<6>[  319.029273] lm3535_brightness_set: lcd-backlight, 0x1f (31)
<6>[  319.029448] <6>lm3535_convert_value: v=31, z=0, res=0x28d73ef8, reg=0x44
<6>[  319.030089] lm3535_brightness_set: zone 0, 0x44 => 0x44, 0 steps, ramp time 0us
<6>[  319.049263] lm3535_brightness_set: lcd-backlight, 0x1d (29)
<6>[  319.049438] <6>lm3535_convert_value: v=29, z=0, res=0x28a65388, reg=0x44
<6>[  319.054038] lm3535_brightness_set: zone 0, 0x44 => 0x44, 0 steps, ramp time 0us
<6>[  319.069099] lm3535_brightness_set: lcd-backlight, 0x1a (26)
<6>[  319.069276] <6>lm3535_convert_value: v=26, z=0, res=0x285d6790, reg=0x43
<6>[  319.069933] lm3535_brightness_set: zone 0, 0x44 => 0x43, 1 steps, ramp time 50000us
<6>[  319.089016] lm3535_brightness_set: lcd-backlight, 0x18 (24)
<6>[  319.089193] <6>lm3535_convert_value: v=24, z=0, res=0x282d1860, reg=0x43
<6>[  319.089839] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  319.109019] lm3535_brightness_set: lcd-backlight, 0x16 (22)
<6>[  319.109196] <6>lm3535_convert_value: v=22, z=0, res=0x27fd07b0, reg=0x43
<6>[  319.109848] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  319.129006] lm3535_brightness_set: lcd-backlight, 0x14 (20)
<6>[  319.129183] <6>lm3535_convert_value: v=20, z=0, res=0x27cd3580, reg=0x42
<6>[  319.129831] lm3535_brightness_set: zone 0, 0x43 => 0x42, 1 steps, ramp time 50000us
<6>[  325.923781] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  325.924364] lm3535_brightness_set: zone 0, 0x42 => 0x0, 66 steps, ramp time 198000us
<6>[  325.959161] request_suspend_state: sleep (0->3) at 325961255120 (2011-08-09 11:12:36.183736696 UTC)
<6>[  325.960728] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  325.961238] accel_i2c_set_config: mode=0 (power off), odr=0 (10Hz), fs=0, interval=0
<6>[  325.961263] 
<6>[  325.964579] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  325.964648] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  325.964746] accel_remove_client: removed client pid 237
<6>[  325.989339] accel_suspend: driver suspended
<6>[  326.013564] keypad_leds_suspend: driver suspended, event = 2
<6>[  326.109046] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  326.109268] pm7540_btn_leds_suspend: driver suspended, event = 2
<6>[  326.109316] lm3535_suspend: called with pm message 2
<6>[  326.109359] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  326.109876] lm3535_brightness_set: zone 0, 0x0 => 0x0, 0 steps, ramp time 0us
<4>[  326.630273] save exit: isCheckpointed 1
<6>[  326.663258] usb_platform_suspend: we are already in lpm, nothing to be done
<6>[  326.663258] get_smem_clock: exit timeout state 10d29 clock 72036064
<6>[  326.663258] get_smem_clock: invalid start state 10d29 clock 72036064
<6>[  326.663258] hw3d_resume: resuming
<6>[  326.731903] wakeup wake lock: mmc_delayed_work
<6>[  326.764809] suspend: exit suspend, ret = 0 (2011-08-09 11:12:41.530105001 UTC)
<6>[  327.330338] usb_platform_suspend: we are already in lpm, nothing to be done
<6>[  327.330338] wakeup wake lock: event6-208
<6>[  327.435848] suspend: exit suspend, ret = 0 (2011-08-09 11:36:59.531776668 UTC)
<6>[  327.677759] request_suspend_state: wakeup (3->0) at 327681238478 (2011-08-09 11:36:59.773666679 UTC)
<6>[  327.703139] accel_open: open request from pid 237
<6>[  327.703219] accel_add_client: added client pid 237
<6>[  327.703501] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  327.703544] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  327.704853] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  327.704911] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  327.705321] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  327.705368] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  328.032236] lm3535_resume: resuming
<6>[  328.477053] lm3535_configure: ALS Register: 0xf8, zone 0
<6>[  328.477126] pm7540_btn_als_changed: ALS zone changed: 0 => 0
<6>[  328.486676] lm3535_brightness_set: lcd-backlight, 0x32 (50)
<6>[  328.489976] <6>lm3535_convert_value: v=50, z=0, res=0x2ab428d0, reg=0x47
<6>[  328.491716] lm3535_brightness_set: zone 0, 0x0 => 0x47, 71 steps, ramp time 106500us
<6>[  328.496681] lm3535_resume: driver resumed
<6>[  328.496753] pm7540_btn_leds_resume: resuming, ALS zone is 0, value 255
<6>[  328.496801] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[  328.986846] keypad_leds_resume: resuming, ALS zone is 0, values 255 0 0
<6>[  329.003498] keypad_leds_resume: driver resumed
<6>[  329.003591] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[  329.003608] 
<6>[  329.006686] accel_i2c_set_config: setting poll_interval to 100ms
<6>[  329.016664] accel_resume: driver resumed
<6>[  411.038558] lm3535_brightness_set: lcd-backlight, 0x1e (30)
<6>[  411.038628] <6>lm3535_convert_value: v=30, z=0, res=0x28bec170, reg=0x44
<6>[  411.039063] lm3535_brightness_set: zone 0, 0x47 => 0x44, 3 steps, ramp time 150000us
<6>[  411.039813] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[  591.052809] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  591.053449] lm3535_brightness_set: zone 0, 0x44 => 0x0, 68 steps, ramp time 102000us
<6>[  591.075219] request_suspend_state: sleep (0->3) at 591078685164 (2011-08-09 11:41:23.171111698 UTC)
<6>[  591.075773] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  591.076443] accel_i2c_set_config: mode=0 (power off), odr=0 (10Hz), fs=0, interval=0
<6>[  591.076474] 
<6>[  591.082283] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  591.082371] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  591.082504] accel_remove_client: removed client pid 237
<6>[  591.113633] accel_suspend: driver suspended
<6>[  591.126671] keypad_leds_suspend: driver suspended, event = 2
<6>[  591.226693] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  591.226883] pm7540_btn_leds_suspend: driver suspended, event = 2
<6>[  591.226919] lm3535_suspend: called with pm message 2
<6>[  591.226946] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  591.229994] lm3535_brightness_set: zone 0, 0x0 => 0x0, 0 steps, ramp time 0us
<4>[  591.977456] save exit: isCheckpointed 1
<6>[  592.006779] usb_platform_suspend: we are already in lpm, nothing to be done
<6>[  592.006779] hw3d_resume: resuming
<6>[  592.007859] wakeup wake lock: event3-208
<6>[  592.078176] usb_lpm_exit(): USB exited from low power mode
<6>[  592.081569] usb cable connected
<6>[  592.108903] suspend: exit suspend, ret = 0 (2011-08-09 11:44:04.525861668 UTC)
<6>[  592.180286] msm_hsusb_phy_reset
<6>[  592.308963] hsusb suspend interrupt
<6>[  592.411174] hsusb reset interrupt
<6>[  592.413459] hsusb resume: speed = HIGH
<6>[  592.516334] hsusb reset interrupt
<6>[  592.518606] hsusb resume: speed = HIGH
<6>[  592.546036] 
<6>[  592.546086] **** Charger Type: HOST PC
<6>[  592.546126] 
<6>[  592.548943] msm_chg_usb_charger_connected
<6>[  592.549194] hsusb: OFFLINE -> ONLINE
<6>[  592.640881] hsusb set_configuration wValue = 1 usbcmd = 80001
<6>[  592.641111] usb_mass_storage usb_mass_storage: config #1
<6>[  592.665248] request_suspend_state: wakeup (3->0) at 592669486842 (2011-08-09 11:44:05.082185011 UTC)
<6>[  592.697938] accel_open: open request from pid 237
<6>[  592.698008] accel_add_client: added client pid 237
<6>[  592.698283] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  592.698329] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  592.699651] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  592.699714] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  592.700128] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  592.700181] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  592.992254] lm3535_resume: resuming
<6>[  593.316019] msm_chg_usb_i_is_available
<6>[  593.424028] lm3535_configure: ALS Register: 0xf8, zone 0
<6>[  593.424099] pm7540_btn_als_changed: ALS zone changed: 0 => 0
<6>[  593.425106] lm3535_brightness_set: lcd-backlight, 0x1e (30)
<6>[  593.425906] <6>lm3535_convert_value: v=30, z=0, res=0x28bec170, reg=0x44
<6>[  593.435944] lm3535_brightness_set: zone 0, 0x0 => 0x44, 68 steps, ramp time 102000us
<6>[  593.436404] lm3535_resume: driver resumed
<6>[  593.436458] pm7540_btn_leds_resume: resuming, ALS zone is 0, value 255
<6>[  593.436501] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[  593.825914] keypad_leds_resume: resuming, ALS zone is 0, values 0 0 0
<6>[  593.831929] keypad_leds_resume: driver resumed
<6>[  593.831981] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[  593.831998] 
<6>[  593.832358] accel_i2c_set_config: setting poll_interval to 100ms
<6>[  593.833916] accel_resume: driver resumed
<6>[  613.130148] hsusb suspend interrupt
<6>[  613.131616] msm_chg_usb_i_is_not_available
<6>[  613.157201] usb cable disconnected
<6>[  614.136508] msm_chg_usb_i_is_not_available
<6>[  614.138026] msm_chg_usb_charger_disconnected
<6>[  614.147749] msm_hsusb_phy_reset
<6>[  614.277656] usb_lpm_enter: usb in low power mode
<6>[  614.277723] hsusb: ONLINE -> OFFLINE
<6>[  620.763284] usb_lpm_exit(): USB exited from low power mode
<6>[  620.766396] usb cable connected
<6>[  620.869534] msm_hsusb_phy_reset
<6>[  620.999441] hsusb suspend interrupt
<6>[  621.101868] hsusb reset interrupt
<6>[  621.104144] hsusb resume: speed = HIGH
<6>[  621.206963] hsusb reset interrupt
<6>[  621.209269] hsusb resume: speed = HIGH
<6>[  621.255818] 
<6>[  621.255846] **** Charger Type: HOST PC
<6>[  621.255863] 
<6>[  621.256896] msm_chg_usb_charger_connected
<6>[  621.257029] hsusb: OFFLINE -> ONLINE
<6>[  621.331563] hsusb set_configuration wValue = 1 usbcmd = 80001
<6>[  621.341396] usb_mass_storage usb_mass_storage: config #1
<6>[  622.005714] msm_chg_usb_i_is_available
<6>[  801.008328] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[  801.010308] lm3535_brightness_set: lcd-backlight, 0x1c (28)
<6>[  801.010476] <6>lm3535_convert_value: v=28, z=0, res=0x288df540, reg=0x44
<6>[  801.011224] lm3535_brightness_set: zone 0, 0x44 => 0x44, 0 steps, ramp time 0us
<6>[  801.028393] lm3535_brightness_set: lcd-backlight, 0x1b (27)
<6>[  801.028573] <6>lm3535_convert_value: v=27, z=0, res=0x2875a698, reg=0x43
<6>[  801.030544] lm3535_brightness_set: zone 0, 0x44 => 0x43, 1 steps, ramp time 50000us
<6>[  801.046696] lm3535_brightness_set: lcd-backlight, 0x19 (25)
<6>[  801.046794] <6>lm3535_convert_value: v=25, z=0, res=0x28453828, reg=0x43
<6>[  801.049803] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  801.066468] lm3535_brightness_set: lcd-backlight, 0x18 (24)
<6>[  801.066568] <6>lm3535_convert_value: v=24, z=0, res=0x282d1860, reg=0x43
<6>[  801.067051] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  801.086428] lm3535_brightness_set: lcd-backlight, 0x16 (22)
<6>[  801.086523] <6>lm3535_convert_value: v=22, z=0, res=0x27fd07b0, reg=0x43
<6>[  801.087004] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  801.106566] lm3535_brightness_set: lcd-backlight, 0x15 (21)
<6>[  801.106666] <6>lm3535_convert_value: v=21, z=0, res=0x27e516c8, reg=0x42
<6>[  801.107151] lm3535_brightness_set: zone 0, 0x43 => 0x42, 1 steps, ramp time 50000us
<6>[  801.126449] lm3535_brightness_set: lcd-backlight, 0x14 (20)
<6>[  801.126546] <6>lm3535_convert_value: v=20, z=0, res=0x27cd3580, reg=0x42
<6>[  801.127028] lm3535_brightness_set: zone 0, 0x42 => 0x42, 0 steps, ramp time 0us
<6>[  808.047393] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  808.049874] lm3535_brightness_set: zone 0, 0x42 => 0x0, 66 steps, ramp time 198000us
<6>[  808.084518] request_suspend_state: sleep (0->3) at 808088756856 (2011-08-09 11:47:40.501456693 UTC)
<6>[  808.085906] accel_i2c_set_config: mode=0 (power off), odr=0 (10Hz), fs=0, interval=0
<6>[  808.085929] 
<6>[  808.086488] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  808.089218] accel_suspend: driver suspended
<6>[  808.092956] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  808.093019] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  808.093118] accel_remove_client: removed client pid 237
<6>[  808.115014] keypad_leds_suspend: driver suspended, event = 2
<6>[  808.205881] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  808.206003] pm7540_btn_leds_suspend: driver suspended, event = 2
<6>[  808.206041] lm3535_suspend: called with pm message 2
<6>[  808.206068] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  808.206473] lm3535_brightness_set: zone 0, 0x0 => 0x0, 0 steps, ramp time 0us
<4>[  808.727734] save exit: isCheckpointed 1
<6>[  907.646069] hsusb suspend interrupt
<6>[  907.648734] msm_chg_usb_i_is_not_available
<6>[  907.651797] usb cable disconnected
<6>[  908.648007] msm_chg_usb_i_is_not_available
<6>[  908.650644] msm_chg_usb_charger_disconnected
<6>[  908.667766] msm_hsusb_phy_reset
<6>[  908.806069] usb_lpm_enter: usb in low power mode
<6>[  908.806137] hsusb: ONLINE -> OFFLINE
<6>[  909.601092] request_suspend_state: wakeup (3->0) at 909605275164 (2011-08-09 11:49:22.017961667 UTC)
<6>[  909.603392] hw3d_late_resume: resuming
<6>[  909.631202] accel_open: open request from pid 237
<6>[  909.631274] accel_add_client: added client pid 237
<6>[  909.631551] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  909.631597] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  909.632904] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  909.632962] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  909.633379] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  909.633426] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  909.975716] lm3535_resume: resuming
<6>[  910.386382] lm3535_configure: ALS Register: 0xf8, zone 0
<6>[  910.386554] pm7540_btn_als_changed: ALS zone changed: 0 => 0
<6>[  910.387209] lm3535_brightness_set: lcd-backlight, 0x1e (30)
<6>[  910.387864] <6>lm3535_convert_value: v=30, z=0, res=0x28bec170, reg=0x44
<6>[  910.388521] lm3535_brightness_set: zone 0, 0x0 => 0x44, 68 steps, ramp time 102000us
<6>[  910.389149] lm3535_resume: driver resumed
<6>[  910.389267] pm7540_btn_leds_resume: resuming, ALS zone is 0, value 255
<6>[  910.389397] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[  910.766011] keypad_leds_resume: resuming, ALS zone is 0, values 0 0 0
<6>[  910.767721] keypad_leds_resume: driver resumed
<6>[  910.767891] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[  910.767956] 
<6>[  910.768596] accel_i2c_set_config: setting poll_interval to 100ms
<6>[  910.771042] accel_resume: driver resumed
<6>[  924.881914] usb_lpm_exit(): USB exited from low power mode
<6>[  924.884782] usb cable connected
<6>[  924.979656] msm_hsusb_phy_reset
<6>[  925.109326] hsusb suspend interrupt
<6>[  925.211696] hsusb reset interrupt
<6>[  925.213961] hsusb resume: speed = HIGH
<6>[  925.316774] hsusb reset interrupt
<6>[  925.319054] hsusb resume: speed = HIGH
<6>[  925.345977] 
<6>[  925.346017] **** Charger Type: HOST PC
<6>[  925.346054] 
<6>[  925.347302] msm_chg_usb_charger_connected
<6>[  925.347526] hsusb: OFFLINE -> ONLINE
<6>[  925.441341] hsusb set_configuration wValue = 1 usbcmd = 80001
<6>[  925.454602] usb_mass_storage usb_mass_storage: config #1
<6>[  926.108339] msm_chg_usb_i_is_available
<6>[  978.418319] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[  978.420362] lm3535_brightness_set: lcd-backlight, 0x1c (28)
<6>[  978.420541] <6>lm3535_convert_value: v=28, z=0, res=0x288df540, reg=0x44
<6>[  978.421222] lm3535_brightness_set: zone 0, 0x44 => 0x44, 0 steps, ramp time 0us
<6>[  978.436901] lm3535_brightness_set: lcd-backlight, 0x1b (27)
<6>[  978.437081] <6>lm3535_convert_value: v=27, z=0, res=0x2875a698, reg=0x43
<6>[  978.437789] lm3535_brightness_set: zone 0, 0x44 => 0x43, 1 steps, ramp time 50000us
<6>[  978.457141] lm3535_brightness_set: lcd-backlight, 0x19 (25)
<6>[  978.457319] <6>lm3535_convert_value: v=25, z=0, res=0x28453828, reg=0x43
<6>[  978.461522] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  978.476929] lm3535_brightness_set: lcd-backlight, 0x18 (24)
<6>[  978.477176] <6>lm3535_convert_value: v=24, z=0, res=0x282d1860, reg=0x43
<6>[  978.477827] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  978.496957] lm3535_brightness_set: lcd-backlight, 0x16 (22)
<6>[  978.497144] <6>lm3535_convert_value: v=22, z=0, res=0x27fd07b0, reg=0x43
<6>[  978.497801] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[  978.517702] lm3535_brightness_set: lcd-backlight, 0x15 (21)
<6>[  978.517881] <6>lm3535_convert_value: v=21, z=0, res=0x27e516c8, reg=0x42
<6>[  978.518541] lm3535_brightness_set: zone 0, 0x43 => 0x42, 1 steps, ramp time 50000us
<6>[  978.536897] lm3535_brightness_set: lcd-backlight, 0x14 (20)
<6>[  978.537081] <6>lm3535_convert_value: v=20, z=0, res=0x27cd3580, reg=0x42
<6>[  978.537724] lm3535_brightness_set: zone 0, 0x42 => 0x42, 0 steps, ramp time 0us
<6>[  985.459741] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  985.460281] lm3535_brightness_set: zone 0, 0x42 => 0x0, 66 steps, ramp time 198000us
<6>[  985.497742] request_suspend_state: sleep (0->3) at 985501981856 (2011-08-09 11:50:37.914681692 UTC)
<6>[  985.499287] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  985.499799] accel_i2c_set_config: mode=0 (power off), odr=0 (10Hz), fs=0, interval=0
<6>[  985.499822] 
<6>[  985.503239] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[  985.503307] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[  985.503402] accel_remove_client: removed client pid 237
<6>[  985.535904] accel_suspend: driver suspended
<6>[  985.538184] keypad_leds_suspend: driver suspended, event = 2
<6>[  985.625961] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[  985.626159] pm7540_btn_leds_suspend: driver suspended, event = 2
<6>[  985.626214] lm3535_suspend: called with pm message 2
<6>[  985.626254] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[  985.626759] lm3535_brightness_set: zone 0, 0x0 => 0x0, 0 steps, ramp time 0us
<4>[  986.148721] save exit: isCheckpointed 1
<6>[ 1054.961061] hsusb suspend interrupt
<6>[ 1054.964651] msm_chg_usb_i_is_not_available
<6>[ 1054.965721] usb cable disconnected
<6>[ 1055.957977] msm_chg_usb_i_is_not_available
<6>[ 1055.960571] msm_chg_usb_charger_disconnected
<6>[ 1055.982667] msm_hsusb_phy_reset
<6>[ 1056.115271] usb_lpm_enter: usb in low power mode
<6>[ 1056.115337] hsusb: ONLINE -> OFFLINE
<6>[ 1056.374784] request_suspend_state: wakeup (3->0) at 1056379023511 (2011-08-09 11:51:48.791721681 UTC)
<6>[ 1056.384882] hw3d_late_resume: resuming
<6>[ 1056.408091] accel_open: open request from pid 237
<6>[ 1056.408161] accel_add_client: added client pid 237
<6>[ 1056.408441] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[ 1056.408486] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[ 1056.409801] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[ 1056.409857] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[ 1056.410269] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[ 1056.410317] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[ 1056.786046] lm3535_resume: resuming
<6>[ 1057.187756] lm3535_configure: ALS Register: 0xf8, zone 0
<6>[ 1057.187869] pm7540_btn_als_changed: ALS zone changed: 0 => 0
<6>[ 1057.189747] lm3535_brightness_set: lcd-backlight, 0x1e (30)
<6>[ 1057.191116] <6>lm3535_convert_value: v=30, z=0, res=0x28bec170, reg=0x44
<6>[ 1057.196677] lm3535_brightness_set: zone 0, 0x0 => 0x44, 68 steps, ramp time 102000us
<6>[ 1057.204526] lm3535_resume: driver resumed
<6>[ 1057.204641] pm7540_btn_leds_resume: resuming, ALS zone is 0, value 255
<6>[ 1057.204727] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[ 1057.585929] keypad_leds_resume: resuming, ALS zone is 0, values 0 0 0
<6>[ 1057.587487] keypad_leds_resume: driver resumed
<6>[ 1057.587659] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[ 1057.587726] 
<6>[ 1057.588312] accel_i2c_set_config: setting poll_interval to 100ms
<6>[ 1057.590491] accel_resume: driver resumed
<6>[ 1078.378582] disabling adb function
<6>[ 1078.378656] usb_function_enable: name = adb, enable = 0
<6>[ 1078.379132] usb_lpm_exit(): USB exited from low power mode
<6>[ 1079.406276] ether_configure() 0
<6>[ 1079.406997] usb_set_composition: composition set to product id = 2d67
<3>[ 1079.408237] msm_hsusb_is_serial_num_null: rpc call success
<3>[ 1079.409386] msm_hsusb_send_serial_number: rpc call failed! error: -22
<3>[ 1079.410442] msm_hsusb_send_productID: rpc call success
<6>[ 1079.419164] msm_hsusb_phy_reset
<6>[ 1080.077751] usb_lpm_enter: usb in low power mode
<6>[ 1080.077894] hsusb: IDLE -> OFFLINE
<6>[ 1090.611911] usb_lpm_exit(): USB exited from low power mode
<6>[ 1090.614997] usb cable connected
<6>[ 1090.709556] msm_hsusb_phy_reset
<6>[ 1090.839301] hsusb suspend interrupt
<6>[ 1090.941249] hsusb reset interrupt
<6>[ 1090.943531] hsusb resume: speed = HIGH
<6>[ 1091.045492] hsusb reset interrupt
<6>[ 1091.047797] hsusb resume: speed = HIGH
<6>[ 1091.075977] 
<6>[ 1091.076019] **** Charger Type: HOST PC
<6>[ 1091.076057] 
<6>[ 1091.077369] msm_chg_usb_charger_connected
<6>[ 1091.077589] hsusb: OFFLINE -> ONLINE
<6>[ 1091.158771] hsusb set_configuration wValue = 1 usbcmd = 1
<6>[ 1091.159227] usb_mass_storage usb_mass_storage: config #1
<6>[ 1091.841947] msm_chg_usb_i_is_available
<6>[ 1152.120572] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[ 1152.122197] lm3535_brightness_set: lcd-backlight, 0x1c (28)
<6>[ 1152.122469] <6>lm3535_convert_value: v=28, z=0, res=0x288df540, reg=0x44
<6>[ 1152.123567] lm3535_brightness_set: zone 0, 0x44 => 0x44, 0 steps, ramp time 0us
<6>[ 1152.146379] lm3535_brightness_set: lcd-backlight, 0x1b (27)
<6>[ 1152.146454] <6>lm3535_convert_value: v=27, z=0, res=0x2875a698, reg=0x43
<6>[ 1152.146972] lm3535_brightness_set: zone 0, 0x44 => 0x43, 1 steps, ramp time 50000us
<6>[ 1152.168072] lm3535_brightness_set: lcd-backlight, 0x19 (25)
<6>[ 1152.168147] <6>lm3535_convert_value: v=25, z=0, res=0x28453828, reg=0x43
<6>[ 1152.168936] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[ 1152.186829] lm3535_brightness_set: lcd-backlight, 0x18 (24)
<6>[ 1152.186904] <6>lm3535_convert_value: v=24, z=0, res=0x282d1860, reg=0x43
<6>[ 1152.187497] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[ 1152.206559] lm3535_brightness_set: lcd-backlight, 0x16 (22)
<6>[ 1152.206629] <6>lm3535_convert_value: v=22, z=0, res=0x27fd07b0, reg=0x43
<6>[ 1152.209226] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[ 1152.227714] lm3535_brightness_set: lcd-backlight, 0x15 (21)
<6>[ 1152.227832] <6>lm3535_convert_value: v=21, z=0, res=0x27e516c8, reg=0x42
<6>[ 1152.228404] lm3535_brightness_set: zone 0, 0x43 => 0x42, 1 steps, ramp time 50000us
<6>[ 1152.247477] lm3535_brightness_set: lcd-backlight, 0x14 (20)
<6>[ 1152.247602] <6>lm3535_convert_value: v=20, z=0, res=0x27cd3580, reg=0x42
<6>[ 1152.248206] lm3535_brightness_set: zone 0, 0x42 => 0x42, 0 steps, ramp time 0us
<6>[ 1159.160587] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[ 1159.161046] lm3535_brightness_set: zone 0, 0x42 => 0x0, 66 steps, ramp time 198000us
<6>[ 1159.202802] request_suspend_state: sleep (0->3) at 1159207041855 (2011-08-09 11:53:31.619740025 UTC)
<6>[ 1159.203199] accel_i2c_set_config: mode=0 (power off), odr=0 (10Hz), fs=0, interval=0
<6>[ 1159.203222] 
<6>[ 1159.207851] accel_suspend: driver suspended
<6>[ 1159.209329] keypad_leds_suspend: driver suspended, event = 2
<6>[ 1159.212569] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[ 1159.220176] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[ 1159.220241] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[ 1159.220337] accel_remove_client: removed client pid 237
<6>[ 1159.286101] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[ 1159.286259] pm7540_btn_leds_suspend: driver suspended, event = 2
<6>[ 1159.286312] lm3535_suspend: called with pm message 2
<6>[ 1159.286356] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[ 1159.286951] lm3535_brightness_set: zone 0, 0x0 => 0x0, 0 steps, ramp time 0us
<4>[ 1159.808627] save exit: isCheckpointed 1
<6>[ 1234.522486] request_suspend_state: wakeup (3->0) at 1234526631833 (2011-08-09 11:54:46.939308336 UTC)
<6>[ 1234.523101] hw3d_late_resume: resuming
<6>[ 1234.542779] accel_open: open request from pid 237
<6>[ 1234.542856] accel_add_client: added client pid 237
<6>[ 1234.543131] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[ 1234.543176] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[ 1234.544471] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[ 1234.544529] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[ 1234.544941] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[ 1234.544989] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[ 1234.802124] lm3535_resume: resuming
<6>[ 1235.196367] lm3535_configure: ALS Register: 0xf8, zone 0
<6>[ 1235.196546] pm7540_btn_als_changed: ALS zone changed: 0 => 0
<6>[ 1235.197214] lm3535_brightness_set: lcd-backlight, 0x1e (30)
<6>[ 1235.197876] <6>lm3535_convert_value: v=30, z=0, res=0x28bec170, reg=0x44
<6>[ 1235.198509] lm3535_brightness_set: zone 0, 0x0 => 0x44, 68 steps, ramp time 102000us
<6>[ 1235.199139] lm3535_resume: driver resumed
<6>[ 1235.199262] pm7540_btn_leds_resume: resuming, ALS zone is 0, value 255
<6>[ 1235.199396] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[ 1235.576047] keypad_leds_resume: resuming, ALS zone is 0, values 0 0 0
<6>[ 1235.577801] keypad_leds_resume: driver resumed
<6>[ 1235.577981] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[ 1235.578047] 
<6>[ 1235.578694] accel_i2c_set_config: setting poll_interval to 100ms
<6>[ 1235.581149] accel_resume: driver resumed
<6>[ 1282.307896] bcm_wlan_power_on: power_mode 1
<3>[ 1282.308137] msm_sdcc_setup_power - ENABLING...WIFI
<7>[ 1282.525966] mmc1: card_present 1
<6>[ 1282.526107] mmc1: Slot status change detected (0 -> 1)
<4>[ 1282.637141] 
<4>[ 1282.637176] Dongle Host Driver, version 4.217.34.14
<4>[ 1282.637221] Compiled in /home/jassycliq/ginger-source/system/wlan/bcm/osrc/open-src/src/dhd/linux/../.. on May 19 2011 at 17:46:50
<7>[ 1282.646362] mmc1: queuing CIS tuple 0x80 length 51
<7>[ 1282.657156] mmc1: queuing CIS tuple 0x80 length 7
<7>[ 1282.660557] mmc1: queuing CIS tuple 0x80 length 2
<7>[ 1282.669537] mmc1: queuing CIS tuple 0x80 length 9
<7>[ 1282.671211] mmc1: queuing CIS tuple 0x00 length 0
<7>[ 1282.672874] mmc1: queuing CIS tuple 0x00 length 0
<7>[ 1282.674532] mmc1: queuing CIS tuple 0x00 length 0
<7>[ 1282.676246] mmc1: queuing CIS tuple 0x00 length 0
<7>[ 1282.677987] mmc1: queuing CIS tuple 0x00 length 0
<7>[ 1282.679712] mmc1: queuing CIS tuple 0x00 length 0
<7>[ 1282.681439] mmc1: queuing CIS tuple 0x00 length 0
<7>[ 1282.683151] mmc1: queuing CIS tuple 0x00 length 0
<7>[ 1282.684872] mmc1: queuing CIS tuple 0x00 length 0
<7>[ 1282.686601] mmc1: queuing CIS tuple 0x00 length 0
<7>[ 1282.688276] mmc1: queuing CIS tuple 0x00 length 0
<7>[ 1282.691517] mmc1: queuing CIS tuple 0x00 length 2
<6>[ 1282.693829] mmc1: new SDIO card at address 0001
<4>[ 1282.697664] F1 signature read @0x18000000=0x5264325
<4>[ 1282.699651] DHD: dongle ram size is set to 393216(orig 393216)
<6>[ 1283.108422] eth0 (): not using net_device_ops yet
<4>[ 1283.110852] eth0: Broadcom Dongle Host Driver mac=00:22:b4:3e:40:ef
<4>[ 1283.110957] dhd_open: ifidx 0
<4>[ 1285.095587] wl_iw_set_essid: join SSID=wi.arb.net
<6>[ 1522.198356] pm7540_btn_brightness_set: button-backlight, 255=>255
<6>[ 1522.200392] lm3535_brightness_set: lcd-backlight, 0x1c (28)
<6>[ 1522.200572] <6>lm3535_convert_value: v=28, z=0, res=0x288df540, reg=0x44
<6>[ 1522.201259] lm3535_brightness_set: zone 0, 0x44 => 0x44, 0 steps, ramp time 0us
<6>[ 1522.216909] lm3535_brightness_set: lcd-backlight, 0x1b (27)
<6>[ 1522.217092] <6>lm3535_convert_value: v=27, z=0, res=0x2875a698, reg=0x43
<6>[ 1522.217744] lm3535_brightness_set: zone 0, 0x44 => 0x43, 1 steps, ramp time 50000us
<6>[ 1522.237196] lm3535_brightness_set: lcd-backlight, 0x19 (25)
<6>[ 1522.237377] <6>lm3535_convert_value: v=25, z=0, res=0x28453828, reg=0x43
<6>[ 1522.239487] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[ 1522.257024] lm3535_brightness_set: lcd-backlight, 0x18 (24)
<6>[ 1522.257216] <6>lm3535_convert_value: v=24, z=0, res=0x282d1860, reg=0x43
<6>[ 1522.257867] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[ 1522.277064] lm3535_brightness_set: lcd-backlight, 0x16 (22)
<6>[ 1522.277254] <6>lm3535_convert_value: v=22, z=0, res=0x27fd07b0, reg=0x43
<6>[ 1522.277911] lm3535_brightness_set: zone 0, 0x43 => 0x43, 0 steps, ramp time 0us
<6>[ 1522.296914] lm3535_brightness_set: lcd-backlight, 0x15 (21)
<6>[ 1522.297099] <6>lm3535_convert_value: v=21, z=0, res=0x27e516c8, reg=0x42
<6>[ 1522.297752] lm3535_brightness_set: zone 0, 0x43 => 0x42, 1 steps, ramp time 50000us
<6>[ 1522.316887] lm3535_brightness_set: lcd-backlight, 0x14 (20)
<6>[ 1522.317066] <6>lm3535_convert_value: v=20, z=0, res=0x27cd3580, reg=0x42
<6>[ 1522.317707] lm3535_brightness_set: zone 0, 0x42 => 0x42, 0 steps, ramp time 0us
<6>[ 1529.236621] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[ 1529.237159] lm3535_brightness_set: zone 0, 0x42 => 0x0, 66 steps, ramp time 198000us
<6>[ 1529.275997] request_suspend_state: sleep (0->3) at 1529280236858 (2011-08-09 11:59:41.692938361 UTC)
<6>[ 1529.277557] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[ 1529.278067] accel_i2c_set_config: mode=0 (power off), odr=0 (10Hz), fs=0, interval=0
<6>[ 1529.278091] 
<6>[ 1529.281482] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[ 1529.281547] accel_i2c_set_config: driver NOT setting config, we are suspended
<6>[ 1529.281646] accel_remove_client: removed client pid 237
<6>[ 1529.316741] accel_suspend: driver suspended
<6>[ 1529.339629] keypad_leds_suspend: driver suspended, event = 2
<6>[ 1529.415972] pm7540_btn_brightness_set: button-backlight, 0=>0
<6>[ 1529.416099] pm7540_btn_leds_suspend: driver suspended, event = 2
<6>[ 1529.416134] lm3535_suspend: called with pm message 2
<6>[ 1529.416164] lm3535_brightness_set: lcd-backlight, 0x0 (0)
<6>[ 1529.417221] lm3535_brightness_set: zone 0, 0x0 => 0x0, 0 steps, ramp time 0us
<4>[ 1529.973794] save exit: isCheckpointed 1